Ozone sanitization system three-quarter view with generator and contact vessel

クリーンルームユーティリティシステム

Ozone の消毒システム

An integrated skid that generates ozone on demand, mixes it into process water and monitors residual concentration for controlled cold sanitization.

On-demand ozone generation
Monitored residual concentration
Stainless contact and mixing path

見積もりリクエスト製品案内

商品紹介

The ozone sanitization system combines oxygen preparation, corona-discharge ozone generation, controlled gas dosing, water-side mixing and residual monitoring. Ozone is produced at the point of use and transferred through a stainless contact path to sanitize storage and distribution equipment without leaving a persistent chemical residue.

主要な特徴

On-site corona-discharge ozone generator

Oxygen feed preparation

Stainless injector and static mixing loop

Contact vessel

Dissolved ozone monitoring

Off-gas connection

Flow or residual-based output control

Integrated HMI and safety interlocks

アプリケーションのソリューション

Stable ozone sanitization requires controlled gas production, efficient dissolution, adequate contact time and verified removal before sensitive points of use.

Ozone transfer into water is inconsistentUse a sized injector and static mixing section matched to water flow and backpressure.

Residual concentration is unknownMeasure dissolved ozone continuously and modulate generator output from the selected setpoint.

Undissolved ozone accumulates in equipmentProvide a defined off-gas path and compatible ozone destructor where required.

Residual ozone reaches downstream processesCoordinate sanitization timing and apply a suitable UV ozone-destruction step before use.

典型的な用途

Purified Water tank sanitizationPharmaceutical distribution loopsBeverage process-water treatmentCosmetic manufacturing waterCold sanitization of hygienic vessels

技術的なパラメータ

Generator capacity, oxygen feed, mixer, contact volume and instrumentation are selected from water flow, ozone demand and sanitization cycle.

コア材料	316L stainless steel wetted piping and contact vessel with ozone-compatible seals
パネルの厚さ	Contact vessel wall typically 2.0–6.0 mm
有効幅	Skid width typically 800–1800 mm
最大長さ	Complete skid height or length typically up to 2600 mm
鋼鉄の厚さを直面する	Generator enclosure and skid sheet typically 1.5–3.0 mm
コア密度	316Lステンレス钢の密度およそ8000 kg/mの ³
熱伝導率	316Lステンレス钢およそ15 W/(m・K) で周囲温度
表面仕上げ	Polished wetted stainless surfaces with satin skid and powder-coated generator cabinet
ジョイントタイプ	Sanitary-clamp or orbital-weld water path with ozone-rated compression tubing on the gas side
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Oxygen concentrator or oxygen supply interfaceDissolved ozone sensorOff-gas destructorContact tank sizeUV ozone destruction integrationRemote communicationStainless generator enclosure

Planning a Ozone Sanitization System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する