Ozone sanitization system three-quarter view with generator and contact vessel

클린룸 유틸리티 시스템

오존 정화 시스템

An integrated skid that generates ozone on demand, mixes it into process water and monitors residual concentration for controlled cold sanitization.

On-demand ozone generation
Monitored residual concentration
Stainless contact and mixing path

견적 요청 제품 찾아보기

상품 소개

The ozone sanitization system combines oxygen preparation, corona-discharge ozone generation, controlled gas dosing, water-side mixing and residual monitoring. Ozone is produced at the point of use and transferred through a stainless contact path to sanitize storage and distribution equipment without leaving a persistent chemical residue.

주요 기능

On-site corona-discharge ozone generator

Oxygen feed preparation

Stainless injector and static mixing loop

Contact vessel

Dissolved ozone monitoring

Off-gas connection

Flow or residual-based output control

Integrated HMI and safety interlocks

응용 프로그램 솔루션

Stable ozone sanitization requires controlled gas production, efficient dissolution, adequate contact time and verified removal before sensitive points of use.

Ozone transfer into water is inconsistentUse a sized injector and static mixing section matched to water flow and backpressure.

Residual concentration is unknownMeasure dissolved ozone continuously and modulate generator output from the selected setpoint.

Undissolved ozone accumulates in equipmentProvide a defined off-gas path and compatible ozone destructor where required.

Residual ozone reaches downstream processesCoordinate sanitization timing and apply a suitable UV ozone-destruction step before use.

일반적인 응용 프로그램

Purified Water tank sanitizationPharmaceutical distribution loopsBeverage process-water treatmentCosmetic manufacturing waterCold sanitization of hygienic vessels

기술 매개변수

Generator capacity, oxygen feed, mixer, contact volume and instrumentation are selected from water flow, ozone demand and sanitization cycle.

핵심 재료	316L stainless steel wetted piping and contact vessel with ozone-compatible seals
패널 두께	Contact vessel wall typically 2.0–6.0 mm
유효 폭	Skid width typically 800–1800 mm
최대 길이	Complete skid height or length typically up to 2600 mm
강철 면면 두께	Generator enclosure and skid sheet typically 1.5–3.0 mm
코어 밀도	316L 스테인리스 밀도 대략 8000 kg/m³
열전도도 (Thermal Conductivity)	316L 스테인리스 주위 온도에서 대략 15 W/(m · K)
표면 마무리	Polished wetted stainless surfaces with satin skid and powder-coated generator cabinet
접합 유형	Sanitary-clamp or orbital-weld water path with ozone-rated compression tubing on the gas side
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Oxygen concentrator or oxygen supply interfaceDissolved ozone sensorOff-gas destructorContact tank sizeUV ozone destruction integration원격 통신Stainless generator enclosure

Planning a Ozone Sanitization System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.