Anglais
Le portugais
espagnol
Le malais
Indonésien
Allemand
Le turc
Le vietnamien
FrançaisCurrent
russe
Arabe
Thaïlandais
Japonais
Coréen
Systèmes utilitaires Cleanroom
Système d'assainissement à l'ozonepar
An integrated skid that generates ozone on demand, mixes it into process water and monitors residual concentration for controlled cold sanitization.
- On-demand ozone generation
- Monitored residual concentration
- Stainless contact and mixing path
Introduction de produit
The ozone sanitization system combines oxygen preparation, corona-discharge ozone generation, controlled gas dosing, water-side mixing and residual monitoring. Ozone is produced at the point of use and transferred through a stainless contact path to sanitize storage and distribution equipment without leaving a persistent chemical residue.
Key Features
Oxygen feed preparation
Stainless injector and static mixing loop
Contact vessel
Dissolved ozone monitoring
Off-gas connection
Flow or residual-based output control
Integrated HMI and safety interlocks
Des solutions pour votre application
Stable ozone sanitization requires controlled gas production, efficient dissolution, adequate contact time and verified removal before sensitive points of use.
Ozone transfer into water is inconsistentUse a sized injector and static mixing section matched to water flow and backpressure.
Residual concentration is unknownMeasure dissolved ozone continuously and modulate generator output from the selected setpoint.
Undissolved ozone accumulates in equipmentProvide a defined off-gas path and compatible ozone destructor where required.
Residual ozone reaches downstream processesCoordinate sanitization timing and apply a suitable UV ozone-destruction step before use.
Les applications typiques
Purified Water tank sanitizationPharmaceutical distribution loopsBeverage process-water treatmentCosmetic manufacturing waterCold sanitization of hygienic vessels
Paramètres techniques
Generator capacity, oxygen feed, mixer, contact volume and instrumentation are selected from water flow, ozone demand and sanitization cycle.
| Matériaux de base | 316L stainless steel wetted piping and contact vessel with ozone-compatible seals |
|---|---|
| Panneau épaisseur | Contact vessel wall typically 2.0–6.0 mm |
| Largeur effective | Skid width typically 800–1800 mm |
| Longueur maximale | Complete skid height or length typically up to 2600 mm |
| Acier face épaisseur | Generator enclosure and skid sheet typically 1.5–3.0 mm |
| Densité Core | Acier inoxydable 316L densité environ 8000 kg/m³ |
| Conductivité thermique | Acier inoxydable 316L environ 15 W/(m · K) à température ambiante |
| surface finie | Polished wetted stainless surfaces with satin skid and powder-coated generator cabinet |
| Type joint | Sanitary-clamp or orbital-weld water path with ozone-rated compression tubing on the gas side |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Oxygen concentrator or oxygen supply interfaceDissolved ozone sensorOff-gas destructorContact tank sizeUV ozone destruction integrationCommunication à distanceStainless generator enclosure
Planning a Ozone Sanitization System specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
