Englisch
Portugiesisch
Spanisch
Malaiisch
indonesisch
DeutschCurrent
Türkischer Sprache
Vietnamesisch
Französisch
Russisch
Arabisch
Thailändisch
Japanisch
Koreanisch
Cleanroom Utility Systemen
Ozon-Sanitierungssystem
An integrated skid that generates ozone on demand, mixes it into process water and monitors residual concentration for controlled cold sanitization.
- On-demand ozone generation
- Monitored residual concentration
- Stainless contact and mixing path
Produkteinführung
The ozone sanitization system combines oxygen preparation, corona-discharge ozone generation, controlled gas dosing, water-side mixing and residual monitoring. Ozone is produced at the point of use and transferred through a stainless contact path to sanitize storage and distribution equipment without leaving a persistent chemical residue.
Key Features
Oxygen feed preparation
Stainless injector and static mixing loop
Contact vessel
Dissolved ozone monitoring
Off-gas connection
Flow or residual-based output control
Integrated HMI and safety interlocks
Lösungen für Ihre Anwendung
Stable ozone sanitization requires controlled gas production, efficient dissolution, adequate contact time and verified removal before sensitive points of use.
Ozone transfer into water is inconsistentUse a sized injector and static mixing section matched to water flow and backpressure.
Residual concentration is unknownMeasure dissolved ozone continuously and modulate generator output from the selected setpoint.
Undissolved ozone accumulates in equipmentProvide a defined off-gas path and compatible ozone destructor where required.
Residual ozone reaches downstream processesCoordinate sanitization timing and apply a suitable UV ozone-destruction step before use.
Typische Anwendungen
Purified Water tank sanitizationPharmaceutical distribution loopsBeverage process-water treatmentCosmetic manufacturing waterCold sanitization of hygienic vessels
Technische Parameter
Generator capacity, oxygen feed, mixer, contact volume and instrumentation are selected from water flow, ozone demand and sanitization cycle.
| Core Material | 316L stainless steel wetted piping and contact vessel with ozone-compatible seals |
|---|---|
| Panel Dicke | Contact vessel wall typically 2.0–6.0 mm |
| Effektive Breite | Skid width typically 800–1800 mm |
| Maximale Länge | Complete skid height or length typically up to 2600 mm |
| Stahl facing Dicke | Generator enclosure and skid sheet typically 1.5–3.0 mm |
| Kerndichte | 316L Edelstahl dichte ca. 8000 kg/m³ |
| Thermische Leitfähigkeit | Edelstahl 316L ca. 15 W/(m · K) bei Umgebungs temperatur |
| Oberfläche Finish | Polished wetted stainless surfaces with satin skid and powder-coated generator cabinet |
| Gemeinsamer Typ | Sanitary-clamp or orbital-weld water path with ozone-rated compression tubing on the gas side |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Oxygen concentrator or oxygen supply interfaceDissolved ozone sensorOff-gas destructorContact tank sizeUV ozone destruction integrationRemote communicationStainless generator enclosure
Planning a Ozone Sanitization System specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
