English
البرتغالية
الإسبانية
اللغة الملاوية
الإندونيسية
الألمانية
اللغة التركية
اللغة الفيتنامية
الفرنسية
الروسية
العربيةالحالي
التايلاندية
اليابانية
الكورية
أنظمة المرافق الغرف النظيفة
Ozone نظام التطهير
An integrated skid that generates ozone on demand, mixes it into process water and monitors residual concentration for controlled cold sanitization.
- On-demand ozone generation
- Monitored residual concentration
- Stainless contact and mixing path
مقدمة المنتج
The ozone sanitization system combines oxygen preparation, corona-discharge ozone generation, controlled gas dosing, water-side mixing and residual monitoring. Ozone is produced at the point of use and transferred through a stainless contact path to sanitize storage and distribution equipment without leaving a persistent chemical residue.
الخصائص الرئيسية
Oxygen feed preparation
Stainless injector and static mixing loop
Contact vessel
Dissolved ozone monitoring
Off-gas connection
Flow or residual-based output control
Integrated HMI and safety interlocks
حلول للتطبيق الخاص بك
Stable ozone sanitization requires controlled gas production, efficient dissolution, adequate contact time and verified removal before sensitive points of use.
Ozone transfer into water is inconsistentUse a sized injector and static mixing section matched to water flow and backpressure.
Residual concentration is unknownMeasure dissolved ozone continuously and modulate generator output from the selected setpoint.
Undissolved ozone accumulates in equipmentProvide a defined off-gas path and compatible ozone destructor where required.
Residual ozone reaches downstream processesCoordinate sanitization timing and apply a suitable UV ozone-destruction step before use.
تطبيقات نموذجية
Purified Water tank sanitizationPharmaceutical distribution loopsBeverage process-water treatmentCosmetic manufacturing waterCold sanitization of hygienic vessels
المعلمات الفنية
Generator capacity, oxygen feed, mixer, contact volume and instrumentation are selected from water flow, ozone demand and sanitization cycle.
| المواد الأساسية | 316L stainless steel wetted piping and contact vessel with ozone-compatible seals |
|---|---|
| سمك اللوحة | Contact vessel wall typically 2.0–6.0 mm |
| العرض الفعال | Skid width typically 800–1800 mm |
| الحد الأقصى الطول | Complete skid height or length typically up to 2600 mm |
| الصلب يواجه سمك | Generator enclosure and skid sheet typically 1.5–3.0 mm |
| الكثافة الأساسية | كثافة فولاذ مقاوم للصدأ 316 لتر تقريبًا |
| الموصلية الحرارية | 316L فولاذ مقاوم للصدأ حوالي 15 واط/(m · K) في درجة حرارة محيطة |
| إنهاء السطح | Polished wetted stainless surfaces with satin skid and powder-coated generator cabinet |
| نوع المشترك | Sanitary-clamp or orbital-weld water path with ozone-rated compression tubing on the gas side |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Oxygen concentrator or oxygen supply interfaceDissolved ozone sensorOff-gas destructorContact tank sizeUV ozone destruction integrationRemote communicationStainless generator enclosure
Planning a Ozone Sanitization System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
