Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Sistemas de utilidad de Cleanroom
Sistema de saneamiento de ozonopor
An integrated skid that generates ozone on demand, mixes it into process water and monitors residual concentration for controlled cold sanitization.
- On-demand ozone generation
- Monitored residual concentration
- Stainless contact and mixing path
Introducción del producto
The ozone sanitization system combines oxygen preparation, corona-discharge ozone generation, controlled gas dosing, water-side mixing and residual monitoring. Ozone is produced at the point of use and transferred through a stainless contact path to sanitize storage and distribution equipment without leaving a persistent chemical residue.
Características clave
Oxygen feed preparation
Stainless injector and static mixing loop
Contact vessel
Dissolved ozone monitoring
Off-gas connection
Flow or residual-based output control
Integrated HMI and safety interlocks
Soluciones para su aplicación
Stable ozone sanitization requires controlled gas production, efficient dissolution, adequate contact time and verified removal before sensitive points of use.
Ozone transfer into water is inconsistentUse a sized injector and static mixing section matched to water flow and backpressure.
Residual concentration is unknownMeasure dissolved ozone continuously and modulate generator output from the selected setpoint.
Undissolved ozone accumulates in equipmentProvide a defined off-gas path and compatible ozone destructor where required.
Residual ozone reaches downstream processesCoordinate sanitization timing and apply a suitable UV ozone-destruction step before use.
Aplicaciones típicas
Purified Water tank sanitizationPharmaceutical distribution loopsBeverage process-water treatmentCosmetic manufacturing waterCold sanitization of hygienic vessels
Parámetros técnicos
Generator capacity, oxygen feed, mixer, contact volume and instrumentation are selected from water flow, ozone demand and sanitization cycle.
| Materiales Core | 316L stainless steel wetted piping and contact vessel with ozone-compatible seals |
|---|---|
| Panel de espesor | Contact vessel wall typically 2.0–6.0 mm |
| Ancho efectivo | Skid width typically 800–1800 mm |
| Longitud máxima | Complete skid height or length typically up to 2600 mm |
| Acero frente a espesor | Generator enclosure and skid sheet typically 1.5–3.0 mm |
| Densidad Core | Densidad de acero inoxidable 316L aproximadamente 8000 kg/m³ |
| Conductividad térmica | Acero inoxidable 316L aproximadamente 15 W/(m · K) a temperatura ambiente |
| Superficie acabada | Polished wetted stainless surfaces with satin skid and powder-coated generator cabinet |
| Tipo conjunto | Sanitary-clamp or orbital-weld water path with ozone-rated compression tubing on the gas side |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Oxygen concentrator or oxygen supply interfaceDissolved ozone sensorOff-gas destructorContact tank sizeUV ozone destruction integrationRemote communicationStainless generator enclosure
Planning a Ozone Sanitization System specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
