Three-quarter view of a standard cleanroom fan filter unit with top blower and perforated diffuser

FFU およびターミナル空気浄化装置

標準ファンフィルターユニット

A self-contained ceiling module for particle-controlled supply air, with an intake prefilter, blower and replaceable final filter.

統合送風機と最終フィルター
モジュラー天井グリッドフォーマット
Intake Prefiltration
Top-Side Fan Access

見積もりリクエスト製品案内

商品紹介

The standard fan filter unit packages a backward-curved centrifugal blower, shallow pressure plenum, mini-pleat final filter and perforated diffuser in one ceiling-mounted housing. Air enters through the top prefilter, passes through the distribution plenum and final filter, and leaves through the downstream face. A perimeter flange and gasket form the interface with the supporting grid. The fan is serviced from above; the final-filter replacement route depends on the selected filter-release configuration.

主要な特徴

中心型遠心送風機は、プレフィルター、最終フィルター、ディフューザ抵抗を克服するために必要な圧力を供給します。

内部バッフルは、ファンインレット直下に速度を集中させる代わりに、ミニプリートパック全体に空気を分配します。

穿孔された下流面は、フィルター媒体を保護し、出口空気パターンを緩和します。

ガスケット付きの天井フランジは、 FFU フレームと支持グリッド間のバイパスを制限します。

アプリケーションのソリューション

Selecting a standard FFU involves the ceiling interface, airflow balance and access to consumable filters.

Air reaches the filter unevenly from the fan outlet.The distribution plenum and baffle spread the incoming air; face measurements during balancing check the installed result.

A poor ceiling fit leaves gaps around the module.Match the flange and gasket to the grid bearing surface, then inspect the perimeter seal after the module is seated.

Prefilter dust loading reduces the airflow available to the clean zone.Keep the removable intake prefilter accessible for inspection and service, and recheck airflow when it is cleaned or replaced.

Final-filter replacement is difficult in a closed ceiling void.Choose the filter-release arrangement before ordering; clean-side release is an option rather than a feature of every module.

典型的な用途

製薬クリーンルームの天井エレクトロニクス組立クリーンゾーン医療機器生産スイート実験室準備室モジュラーハードウォールおよびソフトウォールクリーンルーム

技術的なパラメータ

Common grid formats and configurable electrical and filtration choices complement the standard ceiling-module construction below.

Common Nominal Ceiling Formats	600 × 600 mm and 600 × 1200 mm grid modules
Typical Overall Depth	Approximately 230–320 mm for conventional ceiling FFU configurations
住宅建設	Galvanized steel with a white epoxy-polyester powder coating
Blower Type	Backward-curved centrifugal blower
Filtration Arrangement	Removable intake prefilter and glass-fibre mini-pleat final filter
Final Filter Options	H13 or H14 HEPA; U15 ULPA configuration optional
Common Power Supply Options	220–240 V AC, single phase; 50 Hz or 60 Hz electrical variants
Air Outlet	Perforated downstream diffuser
Ceiling Mounting and Sealing	Drop-in T-grid flange with a continuous perimeter gasket and sealed filter-to-housing interface
Control Options	Individual fan-speed adjustment or group-control connection
サービスアクセス	Top-side fan access; clean-side filter release available as an option
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Square or rectangular ceiling-module formatApplication-selected final-filter gradeClean-side filter-release arrangementIndividual speed adjustment or group-control connection

List the selected module dimensions, filter and controls in the quotation so the supplied configuration is clear.

Selection and Installation

Size the ceiling bay and service space

Send the ceiling-grid opening, support detail, available plenum height and intended access route. Identify whether the unit draws from a common plenum or connects to ductwork. The module envelope, flange bearing and prefilter access need to suit the actual ceiling, not just its nominal grid size.

Specify the operating point

State the required airflow and available inlet conditions, together with the selected final filter. Request input power and sound data at that same duty point; motor nameplate power is not a substitute for operating consumption. For comparison within the range, review the locally controlled AC FFU そして EC-motor FFU without assuming that this standard version uses either drive.

Identify what is included

The described module contains the housing, blower, intake prefilter, final filter and diffuser. Specify the required supply voltage, phase and frequency, final-filter grade, controller and cable connection in the enquiry. Group interfaces and clean-side filter release are choices, not implied standard equipment.

Plan balancing and maintenance

Match the fan-control method to any upstream airflow control. Measure supply airflow after installation and after changes to the filter or fan setting. Keep the top fan and prefilter service route clear; choose clean-side filter release where overhead access is impractical. Isolate electrical power before servicing, protect filter media from handling damage and verify the replacement filter seal before returning the area to use. The FFU is a room air-supply component, not a complete ventilation or containment system.