Temiz Oda Ekipmanları ve Aseptik Tesis Temelleri için Tek Duraklı TedarikçinizUluslararası Proje Destekleri
Open mobile navigationClose mobile navigation
Ana Sayfa / Ürünler / Cleanroom HVAC Systems / Electrode Steam Humidifier 9 kg/h
STJH-ELECTRODE-STEAM-HUMIDIFIER-9KGH

Electrode Steam Humidifier 9 kg/h

A compact single-cylinder steam generator for small cleanroom ducts using conductive potable water.
  • 1.8-9 kg/h output
  • 7.6 kW maximum input
  • Single steam cylinder
Alıntı isteği Browse ürünleri

Ürün tanıtımı

This single-cylinder electrode humidifier modulates from approximately 1.8 to 9 kg/h and has a documented maximum input of 7.6 kW. Supply options span 208-600 V, allowing the cabinet to match common facility electrical systems. Steam production depends on water conductivity because the cylinder water completes the electrical circuit, so inlet-water quality and automatic drain behavior are central to reliable operation.

Ana Özellikler

Compact capacity range

The small cylinder covers local AHU and duct humidity loads without an oversized steam package.

Electrode self-regulation

Steam output follows water level and conductivity under the controller's fill and drain sequence.

Broad voltage selection

Available electrical arrangements support 208-600 V facility supplies.

Teknik parametreler

Steam Output1.8-9 kg/h
Maximum Input7.6 kW
Steam Cylinders1
Supply Voltage208-600 V by selection
Heating PrincipleElectrode boiling
Feed WaterConductive potable water within selected limits
ControlModulating output
DrainAutomatic conductivity and scale management
Primary DutySmall duct humidification
Customization (Özelleşme)Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Applications

For small cleanroom AHUs, laboratories and local supply ducts requiring isothermal humidification from normal potable water.

Solutions for Your Application

Very low-conductivity water prevents the electrode cylinder from reaching rated output.Confirm inlet-water conductivity and use a humidifier technology suited to purified water if it falls outside the electrode range.
Steam condenses on duct surfaces before absorption is complete.Size the dispersion distance from actual duct temperature, airflow and humidity rise, and provide a drained distribution section.

Mevcut Seçenekler

Confirm steam load, voltage, water conductivity, cylinder type, control signal, distributor, hose length, drain cooling and BMS alarms.

Planning a Electrode Steam Humidifier 9 kg/h specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun
E-posta Bize whatsapp WeChat

Ana Sayfa

Ürünler

Haberler

Hakkımızda

İletişim