İngilizce
Portekizce
İspanyolca
Malay dilinde
Endonezya dilinde
Almanca
TürkçeCurrent
Vietnamca
Fransızca
Rusça
Arapça
Taylandca
Japonca
Korece
Load-oriented access
Door width, clear height and enclosed transfer length can be selected together instead of relying on a personnel-sized opening.
Personel ve Malzeme Dekontaminasyon Ekipmanları
Cargo Temiz Oda Hava Duş
A material-entry air shower for exposed load surfaces, with passage clearances and door operation selected around the actual handling equipment.
- Loaded-Cart Clearance
- Selectable Cargo Doors
- Filtered Surface Blow-Off
- Wheeled Transfer Options
Ürün tanıtımı
The cargo air shower combines a wide transfer enclosure with fan-filter compartments, directional nozzle panels and controlled doors at the material boundary. Air returns through the lower collection sections and is filtered before recirculation to the jets. The selected floor transition, doorway arrangement and protected lower surfaces suit movement of loaded carts rather than only a standing operator. Coated-steel and stainless construction choices allow the interior finish to match the cleaning routine.
Ana Özellikler
Reachable intake surfaces
Low-level return sections provide defined locations for inspecting packaging fibres and maintaining upstream filtration.
Choice of door movement
Hinged, sliding and roll-up packages address different requirements for adjacent space and overhead storage.
Additional upper coverage
A ceiling-nozzle option addresses exposed load tops when the load geometry calls for another jet direction.
Uygulamanız için çözümler
A cargo entrance must accommodate a moving load without confusing the nominal chamber size with the space the delivery actually needs.
A pallet fits the chamber, but its overhanging load catches the doorway.Use the maximum loaded envelope and open-door clearance together, including wrapping and projecting handling parts.
Small pallet-jack wheels stop at the floor transition.Select a flush or suitable low-threshold arrangement for those wheels and the recorded loaded wheel forces.
Incoming carts strike the low return openings.Add appropriately positioned bumpers or guarded faces without obstructing the intake or narrowing the required passage.
Stacked packaging shields the surfaces intended for blow-off.Define load orientation and upstream packaging removal, then choose additional outlet positions only for surfaces the jets can reach.
Tipik uygulamalar
Pharmaceutical packaging-material entryClosed ingredient containers on transfer cartsElectronics equipment move-in routesLoaded trolley transfer into controlled assembly areas
Teknik parametreler
Select the passage, jet and control package around your complete loaded transfer route. The paired dimensions below apply to one roll-up-door option; hinged and sliding-door layouts have their own dimensions. Chamber size and clear openings can be tailored to the load and handling equipment. These selectable references do not form one fixed performance rating.
| Transfer Format | Straight-through chamber for loaded trolleys, pallet-handling equipment or movable production equipment |
|---|---|
| Passage and Door Sizing | Custom-sized clear width, height and usable chamber length for the loaded handling envelope |
| Common Roll-Up-Door Layout Option | Roll-up-door reference: overall 1950 × 1500 × 2180 mm; clear chamber 1450 × 1430 × 1910 mm (W × D × H) |
| Body Material Options | Powder-coated steel, Type 304 stainless steel or coated exterior with stainless interior |
| Jet Arrangement | Directional sidewall nozzles; additional ceiling outlets available |
| Common Nozzle-Speed Class | 25 m/s-class nozzle-outlet configuration |
| Shower Timer Option | 0–99 s adjustable controller range |
| Parçacık filtration syonu | Return-air prefilter followed by HEPA final filtration |
| Common Electrical Variant | 380 V AC, three phase, 50 Hz |
| Cargo Door Options | Double-leaf hinged, sliding or roll-up doors with coordinated interlock control |
| Wheeled Access Options | Flush or low-threshold entry; selected base and impact protection for the handling route |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Hinged, sliding or roll-up cargo doorsAdditional ceiling nozzle positionsStainless interior or all-stainless constructionWheel guides and protective bumpersFlush-floor or ramped base arrangementAlternative load and trolley clearances
A usual cargo arrangement combines filtered recirculation, side jets and a controlled transfer sequence. Door mechanism, upper outlets, floor structure and handling accessories are selected separately; pallet-jack or powered-cart suitability depends on the chosen dimensions and loading arrangement.
Selection and Installation
Measure the complete loaded movement
Include the pallet, wrapping, projecting handles, trolley frame and load overhang when recording the widest and highest points. For powered handling equipment, include the mast and operating position. Check the clear opening with the doors fully open, then allow enough chamber length for the complete load and handling equipment to be inside before either boundary is released. Overall enclosure dimensions, clear chamber dimensions and usable door openings are different measurements.
Match the base to the wheels
Record total loaded mass, individual wheel loads, wheel diameter, axle spacing and the route across the entrance. Decide whether the installation needs a flush recess, a baseplate transition or a short ramp; a level-looking floor does not establish a pallet-jack or forklift load rating. Keep wheels and load edges away from return grilles, nozzles and door safety devices.
Expose surfaces rather than overstate cleaning
Set the load position and outlet directions around the surfaces that are actually accessible. Roof jets can be selected for upper faces, but wrapping, stacked cartons and equipment recesses can shield particles from direct airflow. Loose external packaging may need removal before transfer. This dry particle blow-off step does not sterilize the load or clean enclosed product surfaces.
Specify the complete operating package
Review actual door travel, obstruction sensing, emergency release and power-loss behavior for the chosen mechanism. Obtain fan output, filter resistance, electrical demand and sound at the same cargo configuration; nozzle velocity alone is not chamber airflow or cleaning efficiency. Leave space to withdraw filters and service fans without blocking deliveries. Where overhead door storage is preferable to swing space, compare the roll-up door cargo air shower.
Planning a Cargo Cleanroom Air Shower specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
