Nhà cung cấp một cửa của bạn cho thiết bị phòng sạch và thiết bị vô trùng cơ sở thiết yếuHỗ trợ dự án quốc tế
Open mobile navigationClose mobile navigation
Trang chủ / Sản phẩm / Cleanroom HVAC Systems / Electrode Steam Humidifier 9 kg/h
STJH-ELECTRODE-STEAM-HUMIDIFIER-9KGH

Electrode Steam Humidifier 9 kg/h

A compact single-cylinder steam generator for small cleanroom ducts using conductive potable water.
  • 1.8-9 kg/h output
  • 7.6 kW maximum input
  • Single steam cylinder
Yêu cầu báo giá Duyệt các sản phẩm

Giới thiệu Sản phẩm

This single-cylinder electrode humidifier modulates from approximately 1.8 to 9 kg/h and has a documented maximum input of 7.6 kW. Supply options span 208-600 V, allowing the cabinet to match common facility electrical systems. Steam production depends on water conductivity because the cylinder water completes the electrical circuit, so inlet-water quality and automatic drain behavior are central to reliable operation.

Các tính năng chính

Compact capacity range

The small cylinder covers local AHU and duct humidity loads without an oversized steam package.

Electrode self-regulation

Steam output follows water level and conductivity under the controller's fill and drain sequence.

Broad voltage selection

Available electrical arrangements support 208-600 V facility supplies.

Thông số kỹ thuật

Steam Output1.8-9 kg/h
Maximum Input7.6 kW
Steam Cylinders1
Supply Voltage208-600 V by selection
Heating PrincipleElectrode boiling
Feed WaterConductive potable water within selected limits
ControlModulating output
DrainAutomatic conductivity and scale management
Primary DutySmall duct humidification
Tùy chỉnhCó sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Applications

For small cleanroom AHUs, laboratories and local supply ducts requiring isothermal humidification from normal potable water.

Solutions for Your Application

Very low-conductivity water prevents the electrode cylinder from reaching rated output.Confirm inlet-water conductivity and use a humidifier technology suited to purified water if it falls outside the electrode range.
Steam condenses on duct surfaces before absorption is complete.Size the dispersion distance from actual duct temperature, airflow and humidity rise, and provide a drained distribution section.

Các tùy chọn có sẵn

Confirm steam load, voltage, water conductivity, cylinder type, control signal, distributor, hose length, drain cooling and BMS alarms.

Planning a Electrode Steam Humidifier 9 kg/h specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi
Email cho chúng tôi WhatsApp WeChat

Trang chủ

Sản phẩm

Tin tức

Về chúng tôi

Liên hệ