ผู้จัดจําหน่ายแบบครบวงจรสําหรับอุปกรณ์ห้องคลีนรูมและสิ่งจําเป็นสําหรับสิ่งอํานวยความสะดวกปลอดเชื้อการสนับสนุนโครงการระหว่างประเทศ
Open mobile navigationClose mobile navigation
STJH-ELECTRODE-STEAM-HUMIDIFIER-9KGH

Electrode Steam Humidifier 9 kg/h

A compact single-cylinder steam generator for small cleanroom ducts using conductive potable water.
  • 1.8-9 kg/h output
  • 7.6 kW maximum input
  • Single steam cylinder
ขอใบเสนอราคา เรียกดูสินค้า

การแนะนําสินค้า

This single-cylinder electrode humidifier modulates from approximately 1.8 to 9 kg/h and has a documented maximum input of 7.6 kW. Supply options span 208-600 V, allowing the cabinet to match common facility electrical systems. Steam production depends on water conductivity because the cylinder water completes the electrical circuit, so inlet-water quality and automatic drain behavior are central to reliable operation.

คุณสมบัติที่สําคัญ

Compact capacity range

The small cylinder covers local AHU and duct humidity loads without an oversized steam package.

Electrode self-regulation

Steam output follows water level and conductivity under the controller's fill and drain sequence.

Broad voltage selection

Available electrical arrangements support 208-600 V facility supplies.

พารามิเตอร์ทางเทคนิค

Steam Output1.8-9 kg/h
Maximum Input7.6 kW
Steam Cylinders1
Supply Voltage208-600 V by selection
Heating PrincipleElectrode boiling
Feed WaterConductive potable water within selected limits
ControlModulating output
DrainAutomatic conductivity and scale management
Primary DutySmall duct humidification
การปรับแต่งสามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน

Applications

For small cleanroom AHUs, laboratories and local supply ducts requiring isothermal humidification from normal potable water.

Solutions for Your Application

Very low-conductivity water prevents the electrode cylinder from reaching rated output.Confirm inlet-water conductivity and use a humidifier technology suited to purified water if it falls outside the electrode range.
Steam condenses on duct surfaces before absorption is complete.Size the dispersion distance from actual duct temperature, airflow and humidity rise, and provide a drained distribution section.

ตัวเลือกที่มีอยู่

Confirm steam load, voltage, water conductivity, cylinder type, control signal, distributor, hose length, drain cooling and BMS alarms.

Planning a Electrode Steam Humidifier 9 kg/h specification?

ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

พูดคุยกับทีมงานของเรา
อีเมลถึงเรา WhatsApp WeChat

หน้าแรก

ผลิตภัณฑ์

ข่าวสาร

เกี่ยวกับเรา

ติดต่อเรา