STJH WB020-030 cured waterborne epoxy sample with a smooth semi-gloss face and two-layer cut edge on white

STJH-THIN-FILM-EPOXY-FLOOR-COATING-WB020-030

Thin-Film Epoxy Floor Coating 0.2-0.3 mm Smooth Waterborne

A smooth waterborne epoxy coating with a separate priming stage for normal internal mechanical wear.

0.2-0.3 mm complete coating system
Smooth semi-gloss wearing face
Water-vapour-permeable epoxy construction

About This Product

WB020-030 pairs a diluted waterborne epoxy primer with an unfilled wearing coat. The complete 0.2-0.3 mm construction produces a smooth semi-gloss surface while allowing water vapour transmission. Compared with a very thin floor seal, this model uses a clearer primer-and-topcoat arrangement and a greater film build. It remains a substrate-following coating, so repair and levelling work belongs below the finish.

主要な特徴

Dedicated priming layer

The diluted initial application wets the prepared base before the unfilled topcoat establishes the exposed floor surface.

Moderate visual sheen

A semi-gloss face provides a clean solid-colour appearance without using a thick decorative screed or surface aggregate.

Waterborne curing process

Fresh-air movement assists moisture removal during cure, an important consideration when the room is enclosed for refurbishment.

技術的なパラメータ

Resin	Two-part waterborne epoxy
System Thickness	0.2-0.3 mm
Primer Dilution	5% water by weight
Wearing Layer	Unfilled waterborne epoxy
Finish	Smooth semi-gloss
Vapour Behaviour	Water-vapour permeable
アプリケーション	Roller coating
Base	Mechanically prepared concrete or screed
Duty	Normal to medium internal wear
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

Applications

Consider this coating for dry assembly spaces, internal storage rooms and controlled support floors cleaned on a routine schedule. It is most effective where the original concrete is already sound and even. Persistent rising moisture needs a suitable floor design rather than reliance on vapour permeability alone.

Solutions for Your Application

A first coat disappears unevenly into porous concrete.

Establish a uniform primer layer before applying the separate wearing coat.

The room cannot release water vapour during curing.

Arrange fresh-air ventilation and maintain the recommended drying conditions throughout the work.

利用可能なオプション

Choose the solid colour and compatible edge detail. Keep the unfilled smooth topcoat for easy wiping; a deliberately textured waterborne model is available when a different contact profile is required.

Planning a Thin-Film Epoxy Floor Coating 0.2-0.3 mm Smooth Waterborne specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する