STJH WB020-030 cured waterborne epoxy sample with a smooth semi-gloss face and two-layer cut edge on white

STJH-THIN-FILM-EPOXY-FLOOR-COATING-WB020-030

Thin-Film Epoxy Floor Coating 0.2-0.3 mm Smooth Waterborne

A smooth waterborne epoxy coating with a separate priming stage for normal internal mechanical wear.

0.2-0.3 mm complete coating system
Smooth semi-gloss wearing face
Water-vapour-permeable epoxy construction

견적 요청 제품 찾아보기

About This Product

WB020-030 pairs a diluted waterborne epoxy primer with an unfilled wearing coat. The complete 0.2-0.3 mm construction produces a smooth semi-gloss surface while allowing water vapour transmission. Compared with a very thin floor seal, this model uses a clearer primer-and-topcoat arrangement and a greater film build. It remains a substrate-following coating, so repair and levelling work belongs below the finish.

주요 기능

Dedicated priming layer

The diluted initial application wets the prepared base before the unfilled topcoat establishes the exposed floor surface.

Moderate visual sheen

A semi-gloss face provides a clean solid-colour appearance without using a thick decorative screed or surface aggregate.

Waterborne curing process

Fresh-air movement assists moisture removal during cure, an important consideration when the room is enclosed for refurbishment.

기술 매개변수

Resin	Two-part waterborne epoxy
System Thickness	0.2-0.3 mm
Primer Dilution	5% water by weight
Wearing Layer	Unfilled waterborne epoxy
Finish	Smooth semi-gloss
Vapour Behaviour	Water-vapour permeable
Application	Roller coating
Base	Mechanically prepared concrete or screed
Duty	Normal to medium internal wear
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Consider this coating for dry assembly spaces, internal storage rooms and controlled support floors cleaned on a routine schedule. It is most effective where the original concrete is already sound and even. Persistent rising moisture needs a suitable floor design rather than reliance on vapour permeability alone.

Solutions for Your Application

A first coat disappears unevenly into porous concrete.

Establish a uniform primer layer before applying the separate wearing coat.

The room cannot release water vapour during curing.

Arrange fresh-air ventilation and maintain the recommended drying conditions throughout the work.

사용 가능한 옵션

Choose the solid colour and compatible edge detail. Keep the unfilled smooth topcoat for easy wiping; a deliberately textured waterborne model is available when a different contact profile is required.

Planning a Thin-Film Epoxy Floor Coating 0.2-0.3 mm Smooth Waterborne specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.