Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Dedicated priming layer
The diluted initial application wets the prepared base before the unfilled topcoat establishes the exposed floor surface.
STJH-THIN-FILM-EPOXY-FLOOR-COATING-WB020-030
Thin-Film Epoxy Floor Coating 0.2-0.3 mm Smooth Waterborne
A smooth waterborne epoxy coating with a separate priming stage for normal internal mechanical wear.
- 0.2-0.3 mm complete coating system
- Smooth semi-gloss wearing face
- Water-vapour-permeable epoxy construction
About This Product
WB020-030 pairs a diluted waterborne epoxy primer with an unfilled wearing coat. The complete 0.2-0.3 mm construction produces a smooth semi-gloss surface while allowing water vapour transmission. Compared with a very thin floor seal, this model uses a clearer primer-and-topcoat arrangement and a greater film build. It remains a substrate-following coating, so repair and levelling work belongs below the finish.
Características-chave
Moderate visual sheen
A semi-gloss face provides a clean solid-colour appearance without using a thick decorative screed or surface aggregate.
Waterborne curing process
Fresh-air movement assists moisture removal during cure, an important consideration when the room is enclosed for refurbishment.
Parâmetros técnicos
| Resin | Two-part waterborne epoxy |
|---|---|
| System Thickness | 0.2-0.3 mm |
| Primer Dilution | 5% water by weight |
| Wearing Layer | Unfilled waterborne epoxy |
| Finish | Smooth semi-gloss |
| Vapour Behaviour | Water-vapour permeable |
| Z Aplicação | Roller coating |
| Base | Mechanically prepared concrete or screed |
| Duty | Normal to medium internal wear |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Applications
Consider this coating for dry assembly spaces, internal storage rooms and controlled support floors cleaned on a routine schedule. It is most effective where the original concrete is already sound and even. Persistent rising moisture needs a suitable floor design rather than reliance on vapour permeability alone.
Solutions for Your Application
A first coat disappears unevenly into porous concrete.
Establish a uniform primer layer before applying the separate wearing coat.
The room cannot release water vapour during curing.
Arrange fresh-air ventilation and maintain the recommended drying conditions throughout the work.
Opções disponíveis
Choose the solid colour and compatible edge detail. Keep the unfilled smooth topcoat for easy wiping; a deliberately textured waterborne model is available when a different contact profile is required.
Planning a Thin-Film Epoxy Floor Coating 0.2-0.3 mm Smooth Waterborne specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
