Inglês
Portuguêsatual
Espanhol
Língua malaia
Língua indonésia
Alemão
Língua turca
Vietnã
Francês
Língua russa
Língua árabe
Tailandês
Japonês
Coreano
Equipamento de descontaminação de pessoal e materiais
Caixa de passagem de sala limpa estática
Um armário de transferência inoxidável não ventilado que separa duas salas através de portas fechadas e interligadas.
- Câmara de Transferência Não Ventilada
- Intertravamento de porta dupla
- Liso Lipless Interior
- Gasketed Door Closure
Introdução do produto
This wall-mounted pass box provides a dedicated route for small materials without moving personnel between rooms. A double-wall body keeps the door linkage outside the usable transfer space, while a flat stainless floor gives trays a continuous sliding surface. The enclosed chamber can be reached from either room for wiping, and glazed doors allow staff to see whether a load remains inside. It is a passive barrier between sequential door openings, not an air-treatment cabinet.
Características-chave
The uninterrupted sill reduces obstacles when moving shallow trays.
Windowed doors let staff check occupancy before reaching into the cabinet.
Replaceable closure seals allow wear points to be serviced separately.
A mechanical interlock can be selected where powered accessories are unnecessary.
Soluções para sua aplicação
Choose the hatch around the physical transfer task and the way its two sides will be operated.
Staff carry small supplies through a full-sized room doorway.A dedicated hand-transfer opening avoids that unnecessary personnel movement.
Both sides are opened while a container is still being handled.Select interlocking hardware that holds the opposite door closed during access, with a clear recovery method for faults.
Long trays fit inside but strike the doorway or latch.Check the actual clear aperture, hinge intrusion and tray grip space rather than buying on chamber volume alone.
Powder or packaging debris collects around internal fittings.Keep the usable floor clear of exposed linkage and select corner and sill details that can be reached during wiping.
Aplicações típicas
Wrapped packaging supplies between compatible clean areasSmall medical-device components in covered traysElectronics tools and assembly fixturesClosed laboratory sample containers
Use the static arrangement for a transfer route whose material preparation is handled separately. It does not sterilize packaging, remove airborne contamination within the chamber or provide hazardous-material containment.
Parâmetros técnicos
The following are commonly selectable construction references for passive transfer cabinets, not measured specifications of a particular STjh assembly. Chamber dimensions describe the usable enclosure; the wall opening and external body require additional space.
| Princípio de transferência | Passive two-door chamber without a circulation fan or HEPA air-cleaning stage |
|---|---|
| Internal Chamber Size References | 500 × 500 × 500, 600 × 600 × 600 or 800 × 800 × 800 mm, W × D × H |
| Material da câmara | 304 stainless steel; 316L construction selectable |
| Enclosure Sheet References | 1.0 or 1.2 mm stainless sheet for selected body and liner parts |
| Arranjo porta | Opposed manually operated doors with viewing windows |
| Interlock Selection | Mechanical linkage or electrically controlled one-door-at-a-time locking |
| Closure Components | Perimeter door gasket and compression-latch arrangement |
| Interior Construction | Smooth transfer floor with accessible corners and concealed interlock hardware |
| Mounting Arrangement | Through-wall cabinet with perimeter finishing frames |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Mechanical or electronic door interlockConstrução 304 ou 316L inoxidávelOpaque or windowed doorsAlternative chamber proportionsWall-depth finishing framesSupport stand for the handling height
The normal starting point is a stainless chamber with two gasketed doors and a selected interlock. Powered status indication and access-control functions can be added with the electrical version. Dimensions and mounting details can be customized without introducing a fan or filtration stage into the passive transfer principle.
Selection and Installation
Size the opening around the largest tray or container, including its handles and the operator's grip. The clear door aperture can be smaller than the chamber, so a nominal 600 mm cube is not a promise that a 600 mm-wide load will pass through. Locate the transfer floor at a comfortable handling height and support the cabinet independently of lightweight wall finishes where necessary.
A passive hatch does not clean the material or replace the room's pressure-control system. Use it with a defined exterior-wiping and packaging-transfer practice. Where the transfer process also needs an internal filtered-air cycle, compare the HEPA-filtered dynamic pass box rather than adding a blower specification to this static model.
Planejando uma especificação Static Cleanroom Pass Box?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
