English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Dedicated priming layer
The diluted initial application wets the prepared base before the unfilled topcoat establishes the exposed floor surface.
STJH-THIN-FILM-EPOXY-FLOOR-COATING-WB020-030
Thin-Film Epoxy Floor Coating 0.2-0.3 mm Smooth Waterborne
A smooth waterborne epoxy coating with a separate priming stage for normal internal mechanical wear.
- 0.2-0.3 mm complete coating system
- Smooth semi-gloss wearing face
- Water-vapour-permeable epoxy construction
About This Product
WB020-030 pairs a diluted waterborne epoxy primer with an unfilled wearing coat. The complete 0.2-0.3 mm construction produces a smooth semi-gloss surface while allowing water vapour transmission. Compared with a very thin floor seal, this model uses a clearer primer-and-topcoat arrangement and a greater film build. It remains a substrate-following coating, so repair and levelling work belongs below the finish.
Основные характеристики
Moderate visual sheen
A semi-gloss face provides a clean solid-colour appearance without using a thick decorative screed or surface aggregate.
Waterborne curing process
Fresh-air movement assists moisture removal during cure, an important consideration when the room is enclosed for refurbishment.
Технические параметры
| Resin | Two-part waterborne epoxy |
|---|---|
| System Thickness | 0.2-0.3 mm |
| Primer Dilution | 5% water by weight |
| Wearing Layer | Unfilled waterborne epoxy |
| Finish | Smooth semi-gloss |
| Vapour Behaviour | Water-vapour permeable |
| Application | Roller coating |
| Base | Mechanically prepared concrete or screed |
| Duty | Normal to medium internal wear |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Applications
Consider this coating for dry assembly spaces, internal storage rooms and controlled support floors cleaned on a routine schedule. It is most effective where the original concrete is already sound and even. Persistent rising moisture needs a suitable floor design rather than reliance on vapour permeability alone.
Solutions for Your Application
A first coat disappears unevenly into porous concrete.
Establish a uniform primer layer before applying the separate wearing coat.
The room cannot release water vapour during curing.
Arrange fresh-air ventilation and maintain the recommended drying conditions throughout the work.
Доступные варианты
Choose the solid colour and compatible edge detail. Keep the unfilled smooth topcoat for easy wiping; a deliberately textured waterborne model is available when a different contact profile is required.
Planning a Thin-Film Epoxy Floor Coating 0.2-0.3 mm Smooth Waterborne specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
