STJH NC05 novolac epoxy coating sample with a smooth thin resin face visible at its cut edge on white

STJH-CHEMICAL-RESISTANT-NOVOLAC-EPOXY-FLOORING-NC05

Chemical-Resistant Novolac Epoxy Flooring 0.5 mm Coating

A compact novolac epoxy coating for sound floors exposed to chemical splash and intermittent spillage.

High-solids novolac epoxy
0.3-0.5 mm wet-film application
Smooth stand-alone coating configuration

About This Product

NC05 uses a two-component high-solids novolac epoxy as a stand-alone coating over a prepared, primed surface. The stated 0.3-0.5 mm dimension is wet-film thickness, with 0.5 mm representing this model's upper coating selection. It is not a multi-millimetre mortar body or a conductive ESD system. The smooth finish places the chemical-resistant resin directly at the exposed face.

主要な特徴

Chemical-focused resin choice

Novolac chemistry is selected where ordinary decorative epoxy may not suit the expected splash exposure.

Low-profile protection

The thin coating suits a sound dense base without introducing the depth of a repair screed or aggregate mortar.

Visible wearing face

A smooth solid-colour surface helps operators see residue and local damage so spill cleanup and repair can be targeted.

技術的なパラメータ

Binder	Two-component high-solids novolac epoxy
Wet-Film Thickness	0.3-0.5 mm
Construction	Stand-alone coating over compatible primer
Surface	Smooth
Reference Shore D	79-83 at 23 °C
Theoretical Coverage	Approximately 1.9-3.2 m²/L
Application Temperature	10-30 °C
Base	Primed, smooth dense concrete
Exposure Type	Chemical splash and intermittent spillage
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

Applications

Consider NC05 for chemical storage support, pharmaceutical process rooms and battery-charge areas where the slab is already in good condition. Select against the actual chemical list and cleanup interval. A thin chemical-resistant coat is not a substitute for repairing damaged concrete or detailing liquid containment.

Solutions for Your Application

The buyer may interpret wet-film thickness as a thick cured screed.

State the coating application thickness clearly and keep substrate levelling outside this model's role.

One chemical-resistance label is being applied to every stored substance.

Match the novolac formulation to the specific concentration, temperature and contact duration.

利用可能なオプション

Choose a compatible pigment and perimeter treatment. Reinforced or aggregate-filled constructions should be specified separately because they change this stand-alone coating architecture.

Planning a Chemical-Resistant Novolac Epoxy Flooring 0.5 mm Coating specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する