STJH NC05 novolac epoxy coating sample with a smooth thin resin face visible at its cut edge on white

STJH-CHEMICAL-RESISTANT-NOVOLAC-EPOXY-FLOORING-NC05

Chemical-Resistant Novolac Epoxy Flooring 0.5 mm Coating

A compact novolac epoxy coating for sound floors exposed to chemical splash and intermittent spillage.

High-solids novolac epoxy
0.3-0.5 mm wet-film application
Smooth stand-alone coating configuration

Permintaan sebut harga Semak imbas produk

About This Product

NC05 uses a two-component high-solids novolac epoxy as a stand-alone coating over a prepared, primed surface. The stated 0.3-0.5 mm dimension is wet-film thickness, with 0.5 mm representing this model's upper coating selection. It is not a multi-millimetre mortar body or a conductive ESD system. The smooth finish places the chemical-resistant resin directly at the exposed face.

Ciri-ciri Utama

Chemical-focused resin choice

Novolac chemistry is selected where ordinary decorative epoxy may not suit the expected splash exposure.

Low-profile protection

The thin coating suits a sound dense base without introducing the depth of a repair screed or aggregate mortar.

Visible wearing face

A smooth solid-colour surface helps operators see residue and local damage so spill cleanup and repair can be targeted.

Parameter teknikal

Binder	Two-component high-solids novolac epoxy
Wet-Film Thickness	0.3-0.5 mm
Construction	Stand-alone coating over compatible primer
Surface	Smooth
Reference Shore D	79-83 at 23 °C
Theoretical Coverage	Approximately 1.9-3.2 m²/L
Application Temperature	10-30 °C
Base	Primed, smooth dense concrete
Exposure Type	Chemical splash and intermittent spillage
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Applications

Consider NC05 for chemical storage support, pharmaceutical process rooms and battery-charge areas where the slab is already in good condition. Select against the actual chemical list and cleanup interval. A thin chemical-resistant coat is not a substitute for repairing damaged concrete or detailing liquid containment.

Solutions for Your Application

The buyer may interpret wet-film thickness as a thick cured screed.

State the coating application thickness clearly and keep substrate levelling outside this model's role.

One chemical-resistance label is being applied to every stored substance.

Match the novolac formulation to the specific concentration, temperature and contact duration.

Pilihan yang boleh didapati

Choose a compatible pigment and perimeter treatment. Reinforced or aggregate-filled constructions should be specified separately because they change this stand-alone coating architecture.

Planning a Chemical-Resistant Novolac Epoxy Flooring 0.5 mm Coating specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami