Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Chemical-focused resin choice
Novolac chemistry is selected where ordinary decorative epoxy may not suit the expected splash exposure.
STJH-CHEMICAL-RESISTANT-NOVOLAC-EPOXY-FLOORING-NC05
Chemical-Resistant Novolac Epoxy Flooring 0.5 mm Coating
A compact novolac epoxy coating for sound floors exposed to chemical splash and intermittent spillage.
- High-solids novolac epoxy
- 0.3-0.5 mm wet-film application
- Smooth stand-alone coating configuration
About This Product
NC05 uses a two-component high-solids novolac epoxy as a stand-alone coating over a prepared, primed surface. The stated 0.3-0.5 mm dimension is wet-film thickness, with 0.5 mm representing this model's upper coating selection. It is not a multi-millimetre mortar body or a conductive ESD system. The smooth finish places the chemical-resistant resin directly at the exposed face.
Características-chave
Low-profile protection
The thin coating suits a sound dense base without introducing the depth of a repair screed or aggregate mortar.
Visible wearing face
A smooth solid-colour surface helps operators see residue and local damage so spill cleanup and repair can be targeted.
Parâmetros técnicos
| Binder | Two-component high-solids novolac epoxy |
|---|---|
| Wet-Film Thickness | 0.3-0.5 mm |
| Construction | Stand-alone coating over compatible primer |
| Surface | Smooth |
| Reference Shore D | 79-83 at 23 °C |
| Theoretical Coverage | Approximately 1.9-3.2 m²/L |
| Application Temperature | 10-30 °C |
| Base | Primed, smooth dense concrete |
| Exposure Type | Chemical splash and intermittent spillage |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Applications
Consider NC05 for chemical storage support, pharmaceutical process rooms and battery-charge areas where the slab is already in good condition. Select against the actual chemical list and cleanup interval. A thin chemical-resistant coat is not a substitute for repairing damaged concrete or detailing liquid containment.
Solutions for Your Application
The buyer may interpret wet-film thickness as a thick cured screed.
State the coating application thickness clearly and keep substrate levelling outside this model's role.
One chemical-resistance label is being applied to every stored substance.
Match the novolac formulation to the specific concentration, temperature and contact duration.
Opções disponíveis
Choose a compatible pigment and perimeter treatment. Reinforced or aggregate-filled constructions should be specified separately because they change this stand-alone coating architecture.
Planning a Chemical-Resistant Novolac Epoxy Flooring 0.5 mm Coating specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
