Sterility test isolator with dual glove workstations and transfer hatch

Équipement d'écoulement et de confinement laminaires

Test de stérilité isolateur

A closed glove-access isolator arranged for sterility testing workflows, controlled sample entry and separate removal of liquid and solid waste.

Dedicated Sterility Test Layout
Dual-Operator Glove Access
Controlled Sample Transfer
Separated Waste Removal

Demander un devis. Browse les produits

Introduction de produit

The sterility test isolator separates test samples and media from operators and the surrounding laboratory. One or two glove-access work chambers can support membrane filtration, direct inoculation or compatible rapid methods. Samples enter through a bio-decontamination hatch or rapid transfer port, and liquid and solid waste leave through dedicated closed routes. The chamber uses filtered airflow, welded stainless surfaces and pressure monitoring to maintain the selected test environment and reduce false-positive contamination risk.

Key Features

Glove positions are spaced for simultaneous sample opening and test manipulation.

A dedicated transfer hatch separates load preparation from the main test chamber.

Separate liquid and solid waste interfaces prevent waste crossing the clean sample route.

A common control system monitors pressure, airflow and optional bio-decontamination cycles.

Radiused stainless interiors keep membrane-filtration equipment accessible for cleaning.

Des solutions pour votre application

Sterility testing needs both contamination prevention and a workflow that keeps sample entry, test manipulation and waste removal from crossing each other.

Room-borne contamination creates false-positive test results.A closed filtered chamber and controlled transfer path isolate the test from the laboratory.

Two operators cannot reach the same test setup efficiently.Paired glove positions and a long work zone support parallel manipulation.

Waste removal crosses the incoming sample path.Dedicated liquid and solid waste ports separate egress from sample loading.

Test equipment creates inaccessible surfaces.Removable supports and radiused internal geometry preserve cleaning access.

Les applications typiques

Sterile drug sterility testingMedical-device sterility testingMembrane filtration methodsDirect inoculation procedures

Paramètres techniques

Typical configurable construction ranges for a sterility test isolator are listed below.

Matériaux de base	Fully welded SUS316L test chamber with laminated safety glass and CSM glove-sleeve assemblies
Panneau épaisseur	50-100 mm double-skin chamber and air-handling sections
Largeur effective	1800-4500 mm usable test-chamber width
Longueur maximale	Up to 6500 mm overall isolator length
Acier face épaisseur	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins
Densité Core	Environ 8000 kg/m³ pour le matériau de la chambre SUS316L
Conductivité thermique	14 - 16 W / (m · K) pour l'acier inoxydable austénitiquepar
surface finie	Electropolished SUS316L test chamber with welded radiused transitions
Type joint	Pressure-tight welded chamber with sealed glove rings, transfer hatch and separate waste interfaces
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Single- or dual-operator chamberBio-décontamination vapeur intégréeRapid transfer portsMembrane filtration and waste handling modules

Vous planifiez une spécification d'isolateur de test de stérilité?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe