Sterility test isolator with dual glove workstations and transfer hatch

معدات التدفق والاحتواء الصفائحية

عزل اختبار العقم

A closed glove-access isolator arranged for sterility testing workflows, controlled sample entry and separate removal of liquid and solid waste.

Dedicated Sterility Test Layout
Dual-Operator Glove Access
Controlled Sample Transfer
Separated Waste Removal

طلب عرض أسعار تصفح المنتجات

مقدمة المنتج

The sterility test isolator separates test samples and media from operators and the surrounding laboratory. One or two glove-access work chambers can support membrane filtration, direct inoculation or compatible rapid methods. Samples enter through a bio-decontamination hatch or rapid transfer port, and liquid and solid waste leave through dedicated closed routes. The chamber uses filtered airflow, welded stainless surfaces and pressure monitoring to maintain the selected test environment and reduce false-positive contamination risk.

الخصائص الرئيسية

Glove positions are spaced for simultaneous sample opening and test manipulation.

A dedicated transfer hatch separates load preparation from the main test chamber.

Separate liquid and solid waste interfaces prevent waste crossing the clean sample route.

A common control system monitors pressure, airflow and optional bio-decontamination cycles.

Radiused stainless interiors keep membrane-filtration equipment accessible for cleaning.

حلول للتطبيق الخاص بك

Sterility testing needs both contamination prevention and a workflow that keeps sample entry, test manipulation and waste removal from crossing each other.

Room-borne contamination creates false-positive test results.A closed filtered chamber and controlled transfer path isolate the test from the laboratory.

Two operators cannot reach the same test setup efficiently.Paired glove positions and a long work zone support parallel manipulation.

Waste removal crosses the incoming sample path.Dedicated liquid and solid waste ports separate egress from sample loading.

Test equipment creates inaccessible surfaces.Removable supports and radiused internal geometry preserve cleaning access.

تطبيقات نموذجية

Sterile drug sterility testingMedical-device sterility testingMembrane filtration methodsDirect inoculation procedures

المعلمات الفنية

Typical configurable construction ranges for a sterility test isolator are listed below.

المواد الأساسية	Fully welded SUS316L test chamber with laminated safety glass and CSM glove-sleeve assemblies
سمك اللوحة	50 غرفة مزدوجة الجلد وأقسام مناولة الهواء
العرض الفعال	1800-4500 mm usable test-chamber width
الحد الأقصى الطول	Up to 6500 mm overall isolator length
الصلب يواجه سمك	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins
الكثافة الأساسية	تقريبا ، من مادة غرفة SUS316L
الموصلية الحرارية	14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي
إنهاء السطح	Electropolished SUS316L test chamber with welded radiused transitions
نوع المشترك	Pressure-tight welded chamber with sealed glove rings, transfer hatch and separate waste interfaces
التخصيص	متوفر على أساس التطبيق المقصود وبيئة التشغيل.

الخيارات المتاحة

Single- or dual-operator chamberبخار متكامل التطهير الحيويمنافذ النقل السريعMembrane filtration and waste handling modules

هل تخطط لمواصفات عازل اختبار العقم ؟

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا