Sterility test isolator with dual glove workstations and transfer hatch

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

멸균 테스트 격리기

A closed glove-access isolator arranged for sterility testing workflows, controlled sample entry and separate removal of liquid and solid waste.

Dedicated Sterility Test Layout
Dual-Operator Glove Access
Controlled Sample Transfer
Separated Waste Removal

견적 요청 제품 찾아보기

상품 소개

The sterility test isolator separates test samples and media from operators and the surrounding laboratory. One or two glove-access work chambers can support membrane filtration, direct inoculation or compatible rapid methods. Samples enter through a bio-decontamination hatch or rapid transfer port, and liquid and solid waste leave through dedicated closed routes. The chamber uses filtered airflow, welded stainless surfaces and pressure monitoring to maintain the selected test environment and reduce false-positive contamination risk.

주요 기능

Glove positions are spaced for simultaneous sample opening and test manipulation.

A dedicated transfer hatch separates load preparation from the main test chamber.

Separate liquid and solid waste interfaces prevent waste crossing the clean sample route.

A common control system monitors pressure, airflow and optional bio-decontamination cycles.

Radiused stainless interiors keep membrane-filtration equipment accessible for cleaning.

응용 프로그램 솔루션

Sterility testing needs both contamination prevention and a workflow that keeps sample entry, test manipulation and waste removal from crossing each other.

Room-borne contamination creates false-positive test results.A closed filtered chamber and controlled transfer path isolate the test from the laboratory.

Two operators cannot reach the same test setup efficiently.Paired glove positions and a long work zone support parallel manipulation.

Waste removal crosses the incoming sample path.Dedicated liquid and solid waste ports separate egress from sample loading.

Test equipment creates inaccessible surfaces.Removable supports and radiused internal geometry preserve cleaning access.

일반적인 응용 프로그램

Sterile drug sterility testingMedical-device sterility testingMembrane filtration methodsDirect inoculation procedures

기술 매개변수

Typical configurable construction ranges for a sterility test isolator are listed below.

핵심 재료	Fully welded SUS316L test chamber with laminated safety glass and CSM glove-sleeve assemblies
패널 두께	50-100 mm double-skin chamber and air-handling sections
유효 폭	1800-4500 mm usable test-chamber width
최대 길이	Up to 6500 mm overall isolator length
강철 면면 두께	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins
코어 밀도	SUS316L 챔버 재료를 위한 대략 8000 kg/m³
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Electropolished SUS316L test chamber with welded radiused transitions
접합 유형	Pressure-tight welded chamber with sealed glove rings, transfer hatch and separate waste interfaces
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single- or dual-operator chamberIntegrated vapor bio-decontaminationRapid transfer portsMembrane filtration and waste handling modules

무균 테스트 절연체 사양 계획?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.