STJH-STAINLESS-STEEL-CLEANROOM-FLOOR-MOVEMENT-JOINT-ALL-METAL-304

Stainless Steel Cleanroom Floor Movement Joint 304 Mortar-Bed

An all-metal joint profile protects mortar-bed floor edges without a separate rubber insert.

AISI 304 metal construction
Mortar-bed installation
No separate elastomer insert

About This Product

This formed stainless profile is embedded within a mortar-bed tile or stone installation. Its geometry allows horizontal movement while the metal sides protect the adjoining finish edges. Unlike a paired profile with a soft center insert, the selected construction relies on its all-metal section. Perforations provide a mechanical connection to the surrounding mortar when the joint is correctly embedded.

主要な特徴

Protected finish edges

The steel profile provides a defined border at the joint, reducing direct wheel contact with vulnerable tile or stone edges.

Integral movement section

Horizontal movement is accommodated by the formed profile rather than a consumable soft strip between two rails.

Mortar-keyed anchorage

The perforated section engages the bedding material, making full mortar contact central to the installation.

技術的なパラメータ

Material	AISI 304 stainless steel
Construction	All-metal roll-formed profile
Movement Direction	Horizontal
Installation Bed	Mortar
Anchorage	Perforated metal section
Visible Width	12 mm in the base position
Adjacent Surfaces	Mortar-bed tile or natural stone
Edge Function	Metal protection at floor joint
Adjacent Grout Joint	Approximately 2 mm between profile and covering
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

Applications

Consider for supported industrial tile floors, food-plant access routes and clean utility areas maintained with floor-cleaning machines. The joint layout should follow the floor's movement design, and the section must be fully supported so that wheels do not repeatedly strike an unsupported edge.

Solutions for Your Application

The soft strip in a conventional joint is repeatedly damaged by traffic.

Evaluate an all-metal mortar-bed detail where the expected movement can be accommodated by this profile geometry.

Adjoining tile edges chip at a busy crossing.

Embed the profile with complete mortar support and align the exposed metal consistently with the floor finish.

利用可能なオプション

Specify covering thickness, mortar-bed depth and run length. Provide the anticipated movement and wheel traffic so that the joint section, location and adjoining construction can be selected as one assembly.

Planning a Stainless Steel Cleanroom Floor Movement Joint 304 Mortar-Bed specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する