Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Protected finish edges
The steel profile provides a defined border at the joint, reducing direct wheel contact with vulnerable tile or stone edges.
STJH-STAINLESS-STEEL-CLEANROOM-FLOOR-MOVEMENT-JOINT-ALL-METAL-304
Stainless Steel Cleanroom Floor Movement Joint 304 Mortar-Bed
An all-metal joint profile protects mortar-bed floor edges without a separate rubber insert.
- AISI 304 metal construction
- Mortar-bed installation
- No separate elastomer insert
About This Product
This formed stainless profile is embedded within a mortar-bed tile or stone installation. Its geometry allows horizontal movement while the metal sides protect the adjoining finish edges. Unlike a paired profile with a soft center insert, the selected construction relies on its all-metal section. Perforations provide a mechanical connection to the surrounding mortar when the joint is correctly embedded.
Características clave
Integral movement section
Horizontal movement is accommodated by the formed profile rather than a consumable soft strip between two rails.
Mortar-keyed anchorage
The perforated section engages the bedding material, making full mortar contact central to the installation.
Parámetros técnicos
| Material | AISI 304 stainless steel |
|---|---|
| Construction | All-metal roll-formed profile |
| Movement Direction | Horizontal |
| Installation Bed | Mortar |
| Anchorage | Perforated metal section |
| Visible Width | 12 mm in the base position |
| Adjacent Surfaces | Mortar-bed tile or natural stone |
| Edge Function | Metal protection at floor joint |
| Adjacent Grout Joint | Approximately 2 mm between profile and covering |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Applications
Consider for supported industrial tile floors, food-plant access routes and clean utility areas maintained with floor-cleaning machines. The joint layout should follow the floor's movement design, and the section must be fully supported so that wheels do not repeatedly strike an unsupported edge.
Solutions for Your Application
The soft strip in a conventional joint is repeatedly damaged by traffic.
Evaluate an all-metal mortar-bed detail where the expected movement can be accommodated by this profile geometry.
Adjoining tile edges chip at a busy crossing.
Embed the profile with complete mortar support and align the exposed metal consistently with the floor finish.
Opciones disponibles
Specify covering thickness, mortar-bed depth and run length. Provide the anticipated movement and wheel traffic so that the joint section, location and adjoining construction can be selected as one assembly.
Planning a Stainless Steel Cleanroom Floor Movement Joint 304 Mortar-Bed specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
