STJH carbon-network conductive PVC tile sample shown flat with its complete square outline and thin edge on white

STJH-ELECTROSTATIC-CONDUCTIVE-PVC-FLOORING-CT20

Electrostatic-Conductive PVC Flooring Carbon-Network Tile

A modular conductive PVC wearing tile for technical floors that need local panel access.

608 x 608 mm reference tile format
2 mm conductive wearing material
Modular layout for service access

About This Product

The 2 mm tile uses a compacted PVC body with a carbon network and a 608 x 608 mm reference format. It provides the wearing finish for a suitable supporting floor panel; the thin tile itself is not a structural raised-floor module. Its value is the ability to align individual finish pieces with service-access divisions while selecting a conductive electrical pathway.

主要な特徴

Panel-aligned finish

Individual tiles can be applied to compatible access panels so maintenance staff can reach services without cutting a continuous floor covering across multiple modules.

Conductive carbon network

Compacted conductive material provides the electrical wearing body. The supporting panel, adhesive and earthing arrangement must complete the intended path to ground.

Local replacement planning

A damaged finish piece can be addressed at the affected module. Keep replacement material aligned with the original dimensions, electrical type and surface texture.

技術的なパラメータ

Finish Material	Conductive PVC tile
Nominal Thickness	2 mm
Reference Tile Size	608 x 608 mm
Conductive Structure	Carbon-coated pellet network
Resistance Selection	10^4–10^6 Ω
Product Role	Wearing finish on a supporting panel
Attachment	Compatible conductive adhesive
Access Arrangement	Individual panel-aligned tiles
Electrical Connection	Grounded support and finish system
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

Applications

Use on compatible raised-access panels in electronics test rooms and instrument suites where underfloor services need regular attention. The nominal tile size must be reconciled with the supporting panel and its edge trim. A 608 mm tile should not be assumed to fit every 600 mm or 24 inch floor grid without appropriate factory preparation.

Solutions for Your Application

A sheet finish ties several service panels together.

Use individual wearing tiles finished to the panel boundaries so each structural module remains independently removable.

A replacement tile breaks electrical continuity.

Retain the correct adhesive, substrate contact and grounding arrangement, then check the repaired area after the panel is returned to position.

利用可能なオプション

Specify panel-edge treatment, tile preparation and colour. Select the supporting panel's load capacity separately from the electrical wearing finish, and keep lift points accessible after lamination.

Planning a Electrostatic-Conductive PVC Flooring Carbon-Network Tile specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する