Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Panel-aligned finish
Individual tiles can be applied to compatible access panels so maintenance staff can reach services without cutting a continuous floor covering across multiple modules.
STJH-ELECTROSTATIC-CONDUCTIVE-PVC-FLOORING-CT20
Electrostatic-Conductive PVC Flooring Carbon-Network Tile
A modular conductive PVC wearing tile for technical floors that need local panel access.
- 608 x 608 mm reference tile format
- 2 mm conductive wearing material
- Modular layout for service access
About This Product
The 2 mm tile uses a compacted PVC body with a carbon network and a 608 x 608 mm reference format. It provides the wearing finish for a suitable supporting floor panel; the thin tile itself is not a structural raised-floor module. Its value is the ability to align individual finish pieces with service-access divisions while selecting a conductive electrical pathway.
Các tính năng chính
Conductive carbon network
Compacted conductive material provides the electrical wearing body. The supporting panel, adhesive and earthing arrangement must complete the intended path to ground.
Local replacement planning
A damaged finish piece can be addressed at the affected module. Keep replacement material aligned with the original dimensions, electrical type and surface texture.
Thông số kỹ thuật
| Finish Material | Conductive PVC tile |
|---|---|
| Nominal Thickness | 2 mm |
| Reference Tile Size | 608 x 608 mm |
| Conductive Structure | Carbon-coated pellet network |
| Resistance Selection | 10^4–10^6 Ω |
| Product Role | Wearing finish on a supporting panel |
| Attachment | Compatible conductive adhesive |
| Access Arrangement | Individual panel-aligned tiles |
| Electrical Connection | Grounded support and finish system |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
Use on compatible raised-access panels in electronics test rooms and instrument suites where underfloor services need regular attention. The nominal tile size must be reconciled with the supporting panel and its edge trim. A 608 mm tile should not be assumed to fit every 600 mm or 24 inch floor grid without appropriate factory preparation.
Solutions for Your Application
A sheet finish ties several service panels together.
Use individual wearing tiles finished to the panel boundaries so each structural module remains independently removable.
A replacement tile breaks electrical continuity.
Retain the correct adhesive, substrate contact and grounding arrangement, then check the repaired area after the panel is returned to position.
Các tùy chọn có sẵn
Specify panel-edge treatment, tile preparation and colour. Select the supporting panel's load capacity separately from the electrical wearing finish, and keep lift points accessible after lamination.
Planning a Electrostatic-Conductive PVC Flooring Carbon-Network Tile specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
