STJH calcium-sulphate HPL raised-access panel shown complete with laminate surface and separate dark edge band on white

STJH-ANTISTATIC-HPL-RAISED-ACCESS-FLOOR-CG32

Antistatic HPL Raised Access Floor Calcium-Sulphate Core

A mineral-core access panel combining an HPL surface, galvanized backing and conductive edge banding.

High-density calcium-sulphate core
Galvanized-steel underside
Conductive PVC edge protection

About This Product

This panel uses high-density calcium sulphate as its core, with antistatic HPL on top and galvanized steel beneath. Conductive PVC banding protects the four edges while preserving the panel's modular form. The 600 mm grid suits technical room layouts where services must remain accessible. The construction differs from fully encapsulated panels because its perimeter protection is a separate edge band.

主要な特徴

Mineral panel body

The dense calcium-sulphate core provides a mineral alternative to woodcore construction for buyers selecting access flooring by internal material and overall panel behaviour.

Separate edge band

PVC perimeter protection can be visually checked when a panel is lifted. Damaged banding should be addressed before exposed core edges are returned to service.

Layered finish assembly

The HPL face and steel underside perform distinct roles around the core. Panel thickness and supporting components should be selected together for the required room loading.

技術的なパラメータ

Panel Grid	600 x 600 mm
Panel Thickness Range	30–40 mm
Core	Calcium sulphate
Core Density Reference	Approximately 1,650 kg/m³
Top Surface	Antistatic HPL
Bottom Material	Galvanized steel sheet
Backing Thickness	0.3–0.5 mm
Edge Band	Conductive PVC
Access Format	Individually removable panels
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

Applications

Use in laboratories, data rooms and controlled technical spaces that require a mineral-core access floor. Plan equipment supports and service openings so panels remain fully supported at their edges. The HPL and conductive banding should be integrated with the intended earthing arrangement when the space has specific electrostatic-control requirements.

Solutions for Your Application

The internal core material is unclear in a generic access-floor offer.

Specify calcium sulphate explicitly together with the backing and edge-band construction so the complete panel is defined.

Frequent lifting exposes worn perimeter sections.

Inspect the conductive banding during service work and replace damaged edge protection before refitting the module.

利用可能なオプション

Choose a supported panel thickness within the stated range, HPL finish and pedestal arrangement. Detail cut-outs with appropriate protection and local support instead of assuming the unmodified panel's capacity applies after cutting.

Planning a Antistatic HPL Raised Access Floor Calcium-Sulphate Core specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する