English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
Mineral panel body
The dense calcium-sulphate core provides a mineral alternative to woodcore construction for buyers selecting access flooring by internal material and overall panel behaviour.
STJH-ANTISTATIC-HPL-RAISED-ACCESS-FLOOR-CG32
Antistatic HPL Raised Access Floor Calcium-Sulphate Core
A mineral-core access panel combining an HPL surface, galvanized backing and conductive edge banding.
- High-density calcium-sulphate core
- Galvanized-steel underside
- Conductive PVC edge protection
About This Product
This panel uses high-density calcium sulphate as its core, with antistatic HPL on top and galvanized steel beneath. Conductive PVC banding protects the four edges while preserving the panel's modular form. The 600 mm grid suits technical room layouts where services must remain accessible. The construction differs from fully encapsulated panels because its perimeter protection is a separate edge band.
الخصائص الرئيسية
Separate edge band
PVC perimeter protection can be visually checked when a panel is lifted. Damaged banding should be addressed before exposed core edges are returned to service.
Layered finish assembly
The HPL face and steel underside perform distinct roles around the core. Panel thickness and supporting components should be selected together for the required room loading.
المعلمات الفنية
| Panel Grid | 600 x 600 mm |
|---|---|
| Panel Thickness Range | 30–40 mm |
| Core | Calcium sulphate |
| Core Density Reference | Approximately 1,650 kg/m³ |
| Top Surface | Antistatic HPL |
| Bottom Material | Galvanized steel sheet |
| Backing Thickness | 0.3–0.5 mm |
| Edge Band | Conductive PVC |
| Access Format | Individually removable panels |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
Applications
Use in laboratories, data rooms and controlled technical spaces that require a mineral-core access floor. Plan equipment supports and service openings so panels remain fully supported at their edges. The HPL and conductive banding should be integrated with the intended earthing arrangement when the space has specific electrostatic-control requirements.
Solutions for Your Application
The internal core material is unclear in a generic access-floor offer.
Specify calcium sulphate explicitly together with the backing and edge-band construction so the complete panel is defined.
Frequent lifting exposes worn perimeter sections.
Inspect the conductive banding during service work and replace damaged edge protection before refitting the module.
الخيارات المتاحة
Choose a supported panel thickness within the stated range, HPL finish and pedestal arrangement. Detail cut-outs with appropriate protection and local support instead of assuming the unmodified panel's capacity applies after cutting.
Planning a Antistatic HPL Raised Access Floor Calcium-Sulphate Core specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
