日本語
ポルトガル語
スペイン語
マレー語
インドネシア語
ドイツ人。
トルコ語
ベトナム語
フランス語で
ロシア語
アラビア語：アラビア語
タイ語
日本語で。流れ
韓国語
商品紹介
The Cleanroom Transfer Hatch is a compact alternative to a deep pass box when the transfer is limited to records, sample trays or sealed small parts. Its shallow stainless liner sits within the partition rather than projecting far into the room. Opposing flush doors can be mechanically or electronically interlocked, and the smooth tray area is readily accessible from either side for routine cleaning.
主要な特徴
Flush edge treatment reduces protrusions around the clean-side opening.
The removable tray exposes its supporting surface for cleaning.
Optional vision panels let users inspect contents before opening their side.
Compact interlock hardware keeps only one transfer door available at a time.
アプリケーションのソリューション
Small items need a dedicated transfer route without occupying the floor area or chamber depth required for large materials.
A deep pass box projects too far into a restricted aisle.The hatch is designed around a shallow chamber and a compact wall flange.
Paperwork travels through frequently opened personnel doors.The hatch provides a separate interlocked route for documents and small packs.
Small items settle in inaccessible square corners.A radiused stainless liner and removable tray minimise hard-to-reach recesses.
Items left inside a transfer opening are not noticed promptly.The fully visible shallow interior makes retained items easier to see.
典型的な用途
Batch-record transferSealed sample-tray movementSmall electronic component handoverSterile-pack exchangeLaboratory document transfer
技術的なパラメータ
These are selectable common reference configurations for a compact hand-transfer hatch, not measured dimensions or performance of one fixed STjh model. A small stainless liner with manual doors and a mechanical interlock is the reference arrangement; electronic locking and different door materials are optional.
| Construction Material | AISI 304 stainless steel; AISI 316 stainless steel optional |
|---|---|
| Usable Chamber Width | 450 mm compact reference |
| Usable Chamber Height | 450 mm compact reference |
| Internal Depth | 450–460 mm compact reference range |
| Door Operation | Manually operated hinged doors on opposing sides |
| ドアインターロック | Mechanical interlock; electronic interlock optional |
| Internal Construction | Stainless steel liner with radiused corners |
| 表面仕上げ | Brushed stainless steel |
| 取り付け | Through-wall flanges, with a flush frame position available |
| カスタマイズ | 意図したアプリケーションと動作環境に基づいて利用できます。 |
利用可能なオプション
Clear glazed doorsElectronic door interlockAISI 316 stainless steelDoor-open audible alert
Selection and Installation
Size the hatch for the largest document wallet, sealed sample tray or small-parts container, including the space needed to lift it out. Usable chamber width and height are not the wall cut-out or outer frame dimensions. Check the clear door opening separately, especially where a removable tray or projecting latch reduces access.
Match the liner depth and flange positions to the partition thickness so the installation stays compact on the aisle side. Seal the perimeter joint, provide suitable support and leave room for both doors to swing. The tray must lift out without catching the frame, and the opposite door must remain locked while either side is open.
A mechanical interlock operates without an electrical supply; an electronic version needs its own selected power and release arrangement. For restocking several batches on separate shelves, use a full-height pass-through storage cabinet instead of enlarging a small-item handover point.
Planning a Cleanroom Transfer Hatch specification?
寸法、設置条件、性能目標、必要な表面仕上げをお送りください。
