Tiếng Anh
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Mã Lai
Tiếng Indonesia (tiếng Việt)
Tiếng Đức, tiếng Đức
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Tiếng Pháp, tiếng Pháp
Tiếng Nga, tiếng Nga
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Thái (tiếng Thái)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Thiết bị khử ô nhiễm nhân sự và vật liệu
Phòng sạch chuyển Hatch
A shallow, wall-mounted hatch for controlled movement of documents, sealed packs and small components.
- Shallow chamber depth
- Flush wall mounting
- Interlocked opposing doors
- Removable transfer tray
Giới thiệu Sản phẩm
The Cleanroom Transfer Hatch is a compact alternative to a deep pass box when the transfer is limited to records, sample trays or sealed small parts. Its shallow stainless liner sits within the partition rather than projecting far into the room. Opposing flush doors can be mechanically or electronically interlocked, and the smooth tray area is readily accessible from either side for routine cleaning.
Các tính năng chính
Flush edge treatment reduces protrusions around the clean-side opening.
The removable tray exposes its supporting surface for cleaning.
Optional vision panels let users inspect contents before opening their side.
Compact interlock hardware keeps only one transfer door available at a time.
Các giải pháp cho ứng dụng của bạn
Small items need a dedicated transfer route without occupying the floor area or chamber depth required for large materials.
A deep pass box projects too far into a restricted aisle.The hatch is designed around a shallow chamber and a compact wall flange.
Paperwork travels through frequently opened personnel doors.The hatch provides a separate interlocked route for documents and small packs.
Small items settle in inaccessible square corners.A radiused stainless liner and removable tray minimise hard-to-reach recesses.
Items left inside a transfer opening are not noticed promptly.The fully visible shallow interior makes retained items easier to see.
Các ứng dụng điển hình
Batch-record transferSealed sample-tray movementSmall electronic component handoverSterile-pack exchangeLaboratory document transfer
Thông số kỹ thuật
These are selectable common reference configurations for a compact hand-transfer hatch, not measured dimensions or performance of one fixed STjh model. A small stainless liner with manual doors and a mechanical interlock is the reference arrangement; electronic locking and different door materials are optional.
| Construction Material | AISI 304 stainless steel; AISI 316 stainless steel optional |
|---|---|
| Usable Chamber Width | 450 mm compact reference |
| Usable Chamber Height | 450 mm compact reference |
| Internal Depth | 450–460 mm compact reference range |
| Door Operation | Manually operated hinged doors on opposing sides |
| Khóa liên động cửa | Mechanical interlock; electronic interlock optional |
| Internal Construction | Stainless steel liner with radiused corners |
| Kết thúc bề mặt | Brushed stainless steel |
| Lắp đặt | Through-wall flanges, with a flush frame position available |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Các tùy chọn có sẵn
Clear glazed doorsElectronic door interlockAISI 316 stainless steelDoor-open audible alert
Selection and Installation
Size the hatch for the largest document wallet, sealed sample tray or small-parts container, including the space needed to lift it out. Usable chamber width and height are not the wall cut-out or outer frame dimensions. Check the clear door opening separately, especially where a removable tray or projecting latch reduces access.
Match the liner depth and flange positions to the partition thickness so the installation stays compact on the aisle side. Seal the perimeter joint, provide suitable support and leave room for both doors to swing. The tray must lift out without catching the frame, and the opposite door must remain locked while either side is open.
A mechanical interlock operates without an electrical supply; an electronic version needs its own selected power and release arrangement. For restocking several batches on separate shelves, use a full-height pass-through storage cabinet instead of enlarging a small-item handover point.
Planning a Cleanroom Transfer Hatch specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
