Compact stainless steel cleanroom transfer hatch

Peralatan Dekontaminasi Personil dan Bahan

Cleanroom Transfer Hatch (Cleanroom Transfer Hatch)

A shallow, wall-mounted hatch for controlled movement of documents, sealed packs and small components.

Shallow chamber depth
Flush wall mounting
Interlocked opposing doors
Removable transfer tray

Perkenalan produk

The Cleanroom Transfer Hatch is a compact alternative to a deep pass box when the transfer is limited to records, sample trays or sealed small parts. Its shallow stainless liner sits within the partition rather than projecting far into the room. Opposing flush doors can be mechanically or electronically interlocked, and the smooth tray area is readily accessible from either side for routine cleaning.

Fitur utama:

Shallow construction suits narrow corridors and partition-mounted installation.

Flush edge treatment reduces protrusions around the clean-side opening.

The removable tray exposes its supporting surface for cleaning.

Optional vision panels let users inspect contents before opening their side.

Compact interlock hardware keeps only one transfer door available at a time.

Solusi untuk aplikasi Anda

Small items need a dedicated transfer route without occupying the floor area or chamber depth required for large materials.

A deep pass box projects too far into a restricted aisle.The hatch is designed around a shallow chamber and a compact wall flange.

Paperwork travels through frequently opened personnel doors.The hatch provides a separate interlocked route for documents and small packs.

Small items settle in inaccessible square corners.A radiused stainless liner and removable tray minimise hard-to-reach recesses.

Items left inside a transfer opening are not noticed promptly.The fully visible shallow interior makes retained items easier to see.

Aplikasi yang Tipis

Batch-record transferSealed sample-tray movementSmall electronic component handoverSterile-pack exchangeLaboratory document transfer

Parameter teknis

These are selectable common reference configurations for a compact hand-transfer hatch, not measured dimensions or performance of one fixed STjh model. A small stainless liner with manual doors and a mechanical interlock is the reference arrangement; electronic locking and different door materials are optional.

Construction Material	AISI 304 stainless steel; AISI 316 stainless steel optional
Usable Chamber Width	450 mm compact reference
Usable Chamber Height	450 mm compact reference
Internal Depth	450–460 mm compact reference range
Pintu operasi	Manually operated hinged doors on opposing sides
Pengunci pintu	Mechanical interlock; electronic interlock optional
Konstruksi Internal	Stainless steel liner with radiused corners
Permukaan selesai	Brushed stainless steel
Pemasangan	Through-wall flanges, with a flush frame position available
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Clear glazed doorsElectronic door interlockAISI 316 stainless steelDoor-open audible alert

Selection and Installation

Size the hatch for the largest document wallet, sealed sample tray or small-parts container, including the space needed to lift it out. Usable chamber width and height are not the wall cut-out or outer frame dimensions. Check the clear door opening separately, especially where a removable tray or projecting latch reduces access.

Match the liner depth and flange positions to the partition thickness so the installation stays compact on the aisle side. Seal the perimeter joint, provide suitable support and leave room for both doors to swing. The tray must lift out without catching the frame, and the opposite door must remain locked while either side is open.

A mechanical interlock operates without an electrical supply; an electronic version needs its own selected power and release arrangement. For restocking several batches on separate shelves, use a full-height pass-through storage cabinet instead of enlarging a small-item handover point.

Planning a Cleanroom Transfer Hatch specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami