Three-quarter view of stainless-steel high-temperature HEPA filter for hot-air processing

Filter udara dan filtrasi kimia

Filter HEPA Suhu Tinggi

A heat-resistant HEPA filter assembled with glass-microfibre media, high-temperature separators and metal or ceramic framing for hot-air process zones.

Heat-Resistant Construction
Glass-Microfibre Media
Ceramic or Stainless Frame
High-Temperature Gasket

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The high-temperature HEPA filter is designed for ovens, dryers and depyrogenation equipment that operate beyond the temperature limits of standard polyurethane-sealed filters. A glass-microfibre pack is formed with aluminium or glass-based separators and secured inside a stainless-steel or composite-ceramic frame using an inorganic or high-temperature silicone sealant. Braided-glass or silicone gaskets accommodate the selected service temperature. Thermal expansion clearances and reinforced faceguards protect the pack during controlled heat-up and cool-down cycles.

Fitur utama:

Mineral media, metal separators and temperature-rated sealants replace thermoplastic components in the hot airstream.

Stainless-steel or composite-ceramic framing remains dimensionally stable through repeated thermal cycles.

Braided-glass and high-temperature silicone gasket choices suit different oven flange arrangements.

Expansion-tolerant pack mounting reduces mechanical stress as the frame and media heat at different rates.

Solusi untuk aplikasi Anda

Standard HEPA components can soften, outgas or lose their perimeter seal when exposed to prolonged high-temperature airflow.

Polyurethane sealant deteriorates during repeated oven cycles.An inorganic or temperature-rated silicone pack seal is selected for the intended continuous and peak temperature.

Different expansion rates distort the media pack as the filter heats.Controlled pack clearance and compliant high-temperature sealing absorb differential thermal movement.

A conventional rubber gasket hardens and leaks at elevated temperature.Braided-glass or high-temperature silicone gasketing maintains a suitable flange interface.

Rapid heating damages a filter even though its nominal temperature rating is adequate.The robust frame and reinforced pack are intended for defined ramp-up and cool-down procedures.

Aplikasi yang Tipis

Pharmaceutical depyrogenation tunnelsSterilizing and drying ovensFood-process hot-air systemsHigh-temperature coating linesLaboratory thermal chambers

Parameter teknis

Representative construction ranges for high-temperature HEPA filters are listed below.

Bahan inti	Heat-resistant glass-microfibre HEPA media with aluminium or glass-based separators
Ketebalan Panel (Panel Thickness)	84–292 mm overall filter depth
Efektif lebar	Lebar muka nominal 305-610mm
Panjang maksimum	Hingga 610 mm nominal tinggi wajah
Baja menghadap ketebalan	0.8–1.2 mm 304 stainless-steel frame or protective faceguard
Kepadatan inti (core density)	Approximately 45–70 kg/m³ equivalent heat-resistant media-pack density
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.040–0.055 W/(m·K) for the mineral-fibre filter pack
Permukaan selesai	Clean brushed stainless steel or smooth composite-ceramic frame
Jenis Bersama	Braided-glass rope gasket or high-temperature silicone perimeter gasket
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Stainless-steel or composite-ceramic frameBraided-glass or silicone gasketSeparator-style or mini-pleat packContinuous-temperature configurations from 230 °C to 350 °C

Planning a High-Temperature HEPA Filter specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami