Clean steam generator complete three-quarter view with horizontal vessel, blue feedwater pump and control cabinet

クリーンルームユーティリティシステム

クリーン蒸気発電機

A horizontal unfired generator that uses plant steam in a removable U-tube bundle to produce clean steam from separately treated feed water.

Indirect steam-to-steam separation
Serviceable horizontal U-tube bundle
Automated pressure and level control

見積もりリクエスト製品案内

商品紹介

The Clean Steam Generator keeps the plant-steam circuit physically separate from the secondary water and clean-steam space. Primary steam condenses inside a removable U-tube bundle, transferring heat into RO, demineralized or otherwise suitably treated feed water held in the horizontal generator vessel. A level transmitter regulates make-up water while clean-steam pressure modulates primary heat input, allowing the packaged unit to follow process demand without introducing boiler-water treatment chemicals into the secondary steam path.

主要な特徴

Indirect unfired steam generation

Horizontal 316L secondary vessel

Removable U-tube heating bundle

Modulating primary-steam control

Continuous secondary-water level sensing

Dedicated clean-steam safety valve

Automatic blowdown interface

Touchscreen alarms and remote signals

アプリケーションのソリューション

A clean-steam package must isolate boiler additives, control secondary-water inventory and remain serviceable while responding to changing sterilizer or direct-contact process demand.

Plant-steam treatment chemicals cannot enter a direct-contact processUse a closed primary U-tube bundle so only heat crosses into the separately supplied secondary water.

Intermittent sterilizer loads cause clean-steam pressure swingsModulate the primary-steam control valve from secondary pressure while retaining useful steam volume in the horizontal vessel.

Poor secondary-water control promotes carryover or low-level tripsRegulate make-up flow continuously from the vessel level transmitter and configure high- and low-level alarms.

Scale or fouling increases bundle inspection downtimeMatch feed-water quality and blowdown practice to duty, then withdraw the bolted U-tube bundle through the service end.

典型的な用途

Healthcare autoclaves and washer sterilizersFood and beverage direct steam injectionCosmetic process-vessel heatingBioprocess equipment sanitizationAdditive-free clean humidification

技術的なパラメータ

Generator volume, U-tube area, clean-steam pressure, feed-water pressure, blowdown arrangement and control-valve duty are selected from the required load profile and available plant utilities.

コア材料	316L stainless steel clean-steam vessel, U-tube bundle and secondary piping
パネルの厚さ	Generator shell typically 4.0–12.0 mm
有効幅	Packaged skid width typically 1400–2600 mm
最大長さ	Complete packaged skid length typically up to 3050 mm
鋼鉄の厚さを直面する	制御盤筐体およびスキッドシートは通常1.5–3.0 mm
コア密度	316Lステンレス钢の密度およそ8000 kg/mの ³
熱伝導率	316Lステンレス钢およそ15 W/(m・K) で周囲温度
表面仕上げ	Polished clean-steam wetted surfaces with satin-finished external stainless steel
ジョイントタイプ	Bolted removable tube-bundle head, welded secondary piping and hygienic clamps at service instruments
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

RO or demineralized feed-water configurationPneumatic or electric primary control valveIntegrated feed-water pumpAutomatic conductivity blowdownFeed-water preheating or degassingClean-steam separatorInsulated vessel and hot piping

Planning a Clean Steam Generator specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する