Clean steam generator complete three-quarter view with horizontal vessel, blue feedwater pump and control cabinet

Temiz Oda Hizmet Sistemi

Temiz Buhar Jeneratörü

A horizontal unfired generator that uses plant steam in a removable U-tube bundle to produce clean steam from separately treated feed water.

Indirect steam-to-steam separation
Serviceable horizontal U-tube bundle
Automated pressure and level control

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The Clean Steam Generator keeps the plant-steam circuit physically separate from the secondary water and clean-steam space. Primary steam condenses inside a removable U-tube bundle, transferring heat into RO, demineralized or otherwise suitably treated feed water held in the horizontal generator vessel. A level transmitter regulates make-up water while clean-steam pressure modulates primary heat input, allowing the packaged unit to follow process demand without introducing boiler-water treatment chemicals into the secondary steam path.

Ana Özellikler

Indirect unfired steam generation

Horizontal 316L secondary vessel

Removable U-tube heating bundle

Modulating primary-steam control

Continuous secondary-water level sensing

Dedicated clean-steam safety valve

Automatic blowdown interface

Touchscreen alarms and remote signals

Uygulamanız için çözümler

A clean-steam package must isolate boiler additives, control secondary-water inventory and remain serviceable while responding to changing sterilizer or direct-contact process demand.

Plant-steam treatment chemicals cannot enter a direct-contact processUse a closed primary U-tube bundle so only heat crosses into the separately supplied secondary water.

Intermittent sterilizer loads cause clean-steam pressure swingsModulate the primary-steam control valve from secondary pressure while retaining useful steam volume in the horizontal vessel.

Poor secondary-water control promotes carryover or low-level tripsRegulate make-up flow continuously from the vessel level transmitter and configure high- and low-level alarms.

Scale or fouling increases bundle inspection downtimeMatch feed-water quality and blowdown practice to duty, then withdraw the bolted U-tube bundle through the service end.

Tipik uygulamalar

Healthcare autoclaves and washer sterilizersFood and beverage direct steam injectionCosmetic process-vessel heatingBioprocess equipment sanitizationAdditive-free clean humidification

Teknik parametreler

Generator volume, U-tube area, clean-steam pressure, feed-water pressure, blowdown arrangement and control-valve duty are selected from the required load profile and available plant utilities.

Temel malzemeler	316L stainless steel clean-steam vessel, U-tube bundle and secondary piping
Panel kalınlığı	Generator shell typically 4.0–12.0 mm
Effective Width (Etkili Genişlik)	Packaged skid width typically 1400–2600 mm
Maksimum uzunluk	Complete packaged skid length typically up to 3050 mm
Çelik yüz yüze kalınlığı	Kontrol muhafazası ve kızak levhası tipik olarak 1.5-3.0mm
Core Density (Çekirdek Yoğunluğu)	316L paslanmaz çelik yoğunluğu yaklaşık 8000 kg/m³
Termal İletkenlik	Ortam sıcaklığında 316L paslanmaz çelik yaklaşık 15 W/(m · K)
Yüzey bitirme	Polished clean-steam wetted surfaces with satin-finished external stainless steel
Ortak tip	Bolted removable tube-bundle head, welded secondary piping and hygienic clamps at service instruments
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

RO or demineralized feed-water configurationPneumatic or electric primary control valveIntegrated feed-water pumpAutomatic conductivity blowdownFeed-water preheating or degassingClean-steam separatorInsulated vessel and hot piping

Planning a Clean Steam Generator specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun