Clean steam generator complete three-quarter view with horizontal vessel, blue feedwater pump and control cabinet

클린룸 유틸리티 시스템

깨끗한 증기 발생기

A horizontal unfired generator that uses plant steam in a removable U-tube bundle to produce clean steam from separately treated feed water.

Indirect steam-to-steam separation
Serviceable horizontal U-tube bundle
자동 압력 및 레벨 제어

견적 요청 제품 찾아보기

상품 소개

The Clean Steam Generator keeps the plant-steam circuit physically separate from the secondary water and clean-steam space. Primary steam condenses inside a removable U-tube bundle, transferring heat into RO, demineralized or otherwise suitably treated feed water held in the horizontal generator vessel. A level transmitter regulates make-up water while clean-steam pressure modulates primary heat input, allowing the packaged unit to follow process demand without introducing boiler-water treatment chemicals into the secondary steam path.

주요 기능

Indirect unfired steam generation

Horizontal 316L secondary vessel

Removable U-tube heating bundle

Modulating primary-steam control

Continuous secondary-water level sensing

Dedicated clean-steam safety valve

자동 블로우 다운 인터페이스

Touchscreen alarms and remote signals

응용 프로그램 솔루션

A clean-steam package must isolate boiler additives, control secondary-water inventory and remain serviceable while responding to changing sterilizer or direct-contact process demand.

Plant-steam treatment chemicals cannot enter a direct-contact processUse a closed primary U-tube bundle so only heat crosses into the separately supplied secondary water.

Intermittent sterilizer loads cause clean-steam pressure swingsModulate the primary-steam control valve from secondary pressure while retaining useful steam volume in the horizontal vessel.

Poor secondary-water control promotes carryover or low-level tripsRegulate make-up flow continuously from the vessel level transmitter and configure high- and low-level alarms.

Scale or fouling increases bundle inspection downtimeMatch feed-water quality and blowdown practice to duty, then withdraw the bolted U-tube bundle through the service end.

일반적인 응용 프로그램

Healthcare autoclaves and washer sterilizersFood and beverage direct steam injectionCosmetic process-vessel heatingBioprocess equipment sanitizationAdditive-free clean humidification

기술 매개변수

Generator volume, U-tube area, clean-steam pressure, feed-water pressure, blowdown arrangement and control-valve duty are selected from the required load profile and available plant utilities.

핵심 재료	316L stainless steel clean-steam vessel, U-tube bundle and secondary piping
패널 두께	Generator shell typically 4.0–12.0 mm
유효 폭	Packaged skid width typically 1400–2600 mm
최대 길이	Complete packaged skid length typically up to 3050 mm
강철 면면 두께	컨트롤 인클로저 및 스키드 시트 일반적으로 1.5-3.0mm
코어 밀도	316L 스테인리스 밀도 대략 8000 kg/m³
열전도도 (Thermal Conductivity)	316L 스테인리스 주위 온도에서 대략 15 W/(m · K)
표면 마무리	Polished clean-steam wetted surfaces with satin-finished external stainless steel
접합 유형	Bolted removable tube-bundle head, welded secondary piping and hygienic clamps at service instruments
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

RO or demineralized feed-water configurationPneumatic or electric primary control valveIntegrated feed-water pumpAutomatic conductivity blowdownFeed-water preheating or degassingClean-steam separatorInsulated vessel and hot piping

Planning a Clean Steam Generator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.