Three-quarter view of slim white wall-mounted cleanroom air purifier with blue display

FFU dan Peralatan Pemurnian Udara Terminal

Pembersih Udara Cleanroom yang dipasang di dinding

Sebuah unit sirkulasi udara terpasang di dinding ramping yang menyaring udara ruangan dengan prefilter yang dapat diakses dan tahap HEPA sambil menjaga area lantai ruang pembersih dengan jelas.

Floor-Space-Saving Mount
Accessible Front Filters
Variable-Speed Recirculation
Upward Wall Discharge

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The wall-mounted cleanroom air purifier uses a shallow powder-coated cabinet with a lower return-air grille and an upper discharge louvre. In the presented arrangement, a front-access panel opens to the prefilter and retained HEPA cassette, while a reinforced bracket carries the enclosure from the supporting wall. A speed-adjustable fan moves filtered air back into the occupied room; EC drive is one available configuration. The outlet orientation, filter package and service clearances can be arranged around the installation position. The purifier supplements local recirculation and does not replace the make-up air needed to control room pressure.

Fitur utama:

A clear floor beneath the unit

Wall support leaves the area below available for routine floor cleaning and avoids a separate wheeled base in the aisle.

A planned maintenance face

Room-side access brings the replaceable filtration stages within reach without taking the support bracket off the wall.

Adjustable recirculation

Selectable fan speeds allow the air-cleaning duty to be set for occupancy and particle generation.

Separated room-air openings

The presented lower intake and upper louvre provide distinct return and discharge locations for installation planning.

Solusi untuk aplikasi Anda

A compact controlled room needs useful supplemental filtration without sacrificing circulation space or making filter changes awkward.

A freestanding cleaner occupies a cart route or cleaning path.Choose a wall-supported position outside door swings and reserve access below for the room's normal traffic.

The planned mounting height leaves too little room to remove a loaded filter.Set the service face and cassette withdrawal clearance before fixing the bracket, with safe technician access from the room.

The discharge immediately returns to the inlet instead of serving the occupied space.Keep both openings unobstructed and place the outlet in relation to shelves, partitions and the existing room airflow.

A dust display is treated as proof that the room meets its cleanliness target.Use filter indication for maintenance, and assess room particle conditions separately at the relevant locations and operating state.

Aplikasi yang Tipis

Compact laboratory controlled roomsClean corridors and gowning areasMedical-device inspection roomsSmall controlled storage roomsElectronics inspection and packaging rooms

Used for supplemental room-air particle filtration, not as a substitute for process ventilation or a protected unidirectional work area.

Parameter teknis

Common selectable specifications for wall-supported HEPA recirculators are shown below. Cabinet size, installed clearances and airflow vary with the selected fan, filter and mounting package.

Air Treatment Mode	Room-air recirculation through a prefilter and HEPA final stage
Installation Format	Wall-supported cabinet with a matched mounting bracket
Common Wall-Cabinet Reference Envelope	Approximately 550–600 mm W × 750–1000 mm H × 300–450 mm D; separate mounting hardware adds to the installed envelope
Common Recirculation Airflow Classes	Approximately 500–1200 m³/h nominal filtered-air classes with variable-speed operation
Common Supply Option	230 V AC, single phase, 50 Hz; alternative electrical versions available
Final-Filter Selection	H13 HEPA; H14 package available as an alternative
Prefilter Selection	Replaceable particulate prefilter upstream of the HEPA stage
Fan and Control	Speed-adjustable centrifugal fan; EC drive and remote-control packages selectable
Jalur udara	Lower room-air intake and upper discharge louvre for the presented cabinet arrangement
Akses layanan	Room-side front panel for prefilter and HEPA cassette replacement
Housing Finish	Smooth white powder-coated metal cabinet
Condition Indication Options	Filter-loading indication, operating-status display or selected particle-sensor input
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

H14 final-filter alternativeMolecular filter stage for a defined odour dutyEC fan-drive packageAlternative outlet-louvre orientationRemote controller or matched BMS interfaceFilter-loading or particle-sensing packageApplication-specific wall bracket

A common starting configuration uses wall support, a replaceable prefilter, H13 HEPA and local speed adjustment. Molecular media, sensors and network control are selected additions; adding another filter changes the resistance and available airflow.

Selection and Installation

Size the recirculation duty

Use room volume, particle sources, occupancy and the existing ventilation system to select a useful filtered-air delivery rate. Fan airflow is not automatically a certified clean-air delivery rate or a room cleanliness class. This recirculator does not add outdoor make-up air; if pressure-supporting supply is required, compare the positive-pressure HEPA air supply unit.

Check the wall and the complete installed envelope

Match the bracket, anchor layout and supporting wall to the assembled operating weight. A cleanroom partition skin is not automatically a structural support. Include bracket stand-off, power-cable routing and the space needed to open the front panel and withdraw the full filter cassette; cabinet-only catalogue dimensions do not include all these clearances.

Place the intake and outlet deliberately

Keep shelves, curtains and stored materials away from the air openings. Locate the upper louvre so discharge is not immediately drawn back into the intake, and check nearby benches for unwanted draughts. Room mixing depends on furniture and the surrounding supply/return pattern; this unit does not create a unidirectional work zone.

Match monitoring and sound to the actual duty

Select the filter package and speed together, then assess electrical input and sound at that operating point. EC describes a drive arrangement, not an acoustic rating. A filter-loading indicator supports maintenance; a particle sensor is a separate option and does not establish an ISO cleanroom classification. Plan power isolation and room-side access before setting the mounting height.

Planning a Wall-Mounted Cleanroom Air Purifier specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami