English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
A clear floor beneath the unit
Wall support leaves the area below available for routine floor cleaning and avoids a separate wheeled base in the aisle.
УФУ и терминальное оборудование для очистки воздуха
Настенный очиститель воздуха в чистой комнате
Тонкий настенный рециркуляционный агрегат фильтрует воздух помещения через доступные для обслуживания ступени предварительной очистки и HEPA-фильтрации, сохраняя свободной площадь пола чистого помещения.
- Floor-Space-Saving Mount
- Accessible Front Filters
- Variable-Speed Recirculation
- Upward Wall Discharge
Введение продукции
The wall-mounted cleanroom air purifier uses a shallow powder-coated cabinet with a lower return-air grille and an upper discharge louvre. In the presented arrangement, a front-access panel opens to the prefilter and retained HEPA cassette, while a reinforced bracket carries the enclosure from the supporting wall. A speed-adjustable fan moves filtered air back into the occupied room; EC drive is one available configuration. The outlet orientation, filter package and service clearances can be arranged around the installation position. The purifier supplements local recirculation and does not replace the make-up air needed to control room pressure.
Основные характеристики
A planned maintenance face
Room-side access brings the replaceable filtration stages within reach without taking the support bracket off the wall.
Adjustable recirculation
Selectable fan speeds allow the air-cleaning duty to be set for occupancy and particle generation.
Separated room-air openings
The presented lower intake and upper louvre provide distinct return and discharge locations for installation planning.
Решения для вашего приложения
A compact controlled room needs useful supplemental filtration without sacrificing circulation space or making filter changes awkward.
A freestanding cleaner occupies a cart route or cleaning path.Choose a wall-supported position outside door swings and reserve access below for the room's normal traffic.
The planned mounting height leaves too little room to remove a loaded filter.Set the service face and cassette withdrawal clearance before fixing the bracket, with safe technician access from the room.
The discharge immediately returns to the inlet instead of serving the occupied space.Keep both openings unobstructed and place the outlet in relation to shelves, partitions and the existing room airflow.
A dust display is treated as proof that the room meets its cleanliness target.Use filter indication for maintenance, and assess room particle conditions separately at the relevant locations and operating state.
Типичные приложения
Compact laboratory controlled roomsClean corridors and gowning areasMedical-device inspection roomsSmall controlled storage roomsElectronics inspection and packaging rooms
Used for supplemental room-air particle filtration, not as a substitute for process ventilation or a protected unidirectional work area.
Технические параметры
Common selectable specifications for wall-supported HEPA recirculators are shown below. Cabinet size, installed clearances and airflow vary with the selected fan, filter and mounting package.
| Air Treatment Mode | Room-air recirculation through a prefilter and HEPA final stage |
|---|---|
| Installation Format | Wall-supported cabinet with a matched mounting bracket |
| Common Wall-Cabinet Reference Envelope | Approximately 550–600 mm W × 750–1000 mm H × 300–450 mm D; separate mounting hardware adds to the installed envelope |
| Common Recirculation Airflow Classes | Approximately 500–1200 m³/h nominal filtered-air classes with variable-speed operation |
| Common Supply Option | 230 V AC, single phase, 50 Hz; alternative electrical versions available |
| Final-Filter Selection | H13 HEPA; H14 package available as an alternative |
| Prefilter Selection | Replaceable particulate prefilter upstream of the HEPA stage |
| Fan and Control | Speed-adjustable centrifugal fan; EC drive and remote-control packages selectable |
| Воздушный путь | Lower room-air intake and upper discharge louvre for the presented cabinet arrangement |
| Доступ к услугам | Room-side front panel for prefilter and HEPA cassette replacement |
| Housing Finish | Smooth white powder-coated metal cabinet |
| Condition Indication Options | Filter-loading indication, operating-status display or selected particle-sensor input |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
H14 final-filter alternativeMolecular filter stage for a defined odour dutyEC fan-drive packageAlternative outlet-louvre orientationRemote controller or matched BMS interfaceFilter-loading or particle-sensing packageApplication-specific wall bracket
A common starting configuration uses wall support, a replaceable prefilter, H13 HEPA and local speed adjustment. Molecular media, sensors and network control are selected additions; adding another filter changes the resistance and available airflow.
Selection and Installation
Size the recirculation duty
Use room volume, particle sources, occupancy and the existing ventilation system to select a useful filtered-air delivery rate. Fan airflow is not automatically a certified clean-air delivery rate or a room cleanliness class. This recirculator does not add outdoor make-up air; if pressure-supporting supply is required, compare the positive-pressure HEPA air supply unit.
Check the wall and the complete installed envelope
Match the bracket, anchor layout and supporting wall to the assembled operating weight. A cleanroom partition skin is not automatically a structural support. Include bracket stand-off, power-cable routing and the space needed to open the front panel and withdraw the full filter cassette; cabinet-only catalogue dimensions do not include all these clearances.
Place the intake and outlet deliberately
Keep shelves, curtains and stored materials away from the air openings. Locate the upper louvre so discharge is not immediately drawn back into the intake, and check nearby benches for unwanted draughts. Room mixing depends on furniture and the surrounding supply/return pattern; this unit does not create a unidirectional work zone.
Match monitoring and sound to the actual duty
Select the filter package and speed together, then assess electrical input and sound at that operating point. EC describes a drive arrangement, not an acoustic rating. A filter-loading indicator supports maintenance; a particle sensor is a separate option and does not establish an ISO cleanroom classification. Plan power isolation and room-side access before setting the mounting height.
Planning a Wall-Mounted Cleanroom Air Purifier specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
