Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
A clear floor beneath the unit
Wall support leaves the area below available for routine floor cleaning and avoids a separate wheeled base in the aisle.
FFU y equipos de purificación de aire terminal
Purificador de aire de sala limpia
Una delgada Unidad de recirculación montada en la pared que filtra el aire de la habitación a través del prefiltro accesible y las etapas HEPA mientras mantiene el área del piso de la sala limpia despejada.
- Soporte para ahorrar espacio
- Filtros frontales accesibles
- Variable-Speed Recirculation
- Descarga de pared hacia arriba
Introducción del producto
The wall-mounted cleanroom air purifier uses a shallow powder-coated cabinet with a lower return-air grille and an upper discharge louvre. In the presented arrangement, a front-access panel opens to the prefilter and retained HEPA cassette, while a reinforced bracket carries the enclosure from the supporting wall. A speed-adjustable fan moves filtered air back into the occupied room; EC drive is one available configuration. The outlet orientation, filter package and service clearances can be arranged around the installation position. The purifier supplements local recirculation and does not replace the make-up air needed to control room pressure.
Características clave
A planned maintenance face
Room-side access brings the replaceable filtration stages within reach without taking the support bracket off the wall.
Adjustable recirculation
Selectable fan speeds allow the air-cleaning duty to be set for occupancy and particle generation.
Separated room-air openings
The presented lower intake and upper louvre provide distinct return and discharge locations for installation planning.
Soluciones para su aplicación
A compact controlled room needs useful supplemental filtration without sacrificing circulation space or making filter changes awkward.
A freestanding cleaner occupies a cart route or cleaning path.Choose a wall-supported position outside door swings and reserve access below for the room's normal traffic.
The planned mounting height leaves too little room to remove a loaded filter.Set the service face and cassette withdrawal clearance before fixing the bracket, with safe technician access from the room.
The discharge immediately returns to the inlet instead of serving the occupied space.Keep both openings unobstructed and place the outlet in relation to shelves, partitions and the existing room airflow.
A dust display is treated as proof that the room meets its cleanliness target.Use filter indication for maintenance, and assess room particle conditions separately at the relevant locations and operating state.
Aplicaciones típicas
Compact laboratory controlled roomsCorredores limpios y zonas de derriboSalas de inspección de dispositivos médicosPequeñas salas de almacenamiento controladasElectronics inspection and packaging rooms
Used for supplemental room-air particle filtration, not as a substitute for process ventilation or a protected unidirectional work area.
Parámetros técnicos
Common selectable specifications for wall-supported HEPA recirculators are shown below. Cabinet size, installed clearances and airflow vary with the selected fan, filter and mounting package.
| Air Treatment Mode | Room-air recirculation through a prefilter and HEPA final stage |
|---|---|
| Installation Format | Wall-supported cabinet with a matched mounting bracket |
| Common Wall-Cabinet Reference Envelope | Approximately 550–600 mm W × 750–1000 mm H × 300–450 mm D; separate mounting hardware adds to the installed envelope |
| Common Recirculation Airflow Classes | Approximately 500–1200 m³/h nominal filtered-air classes with variable-speed operation |
| Common Supply Option | 230 V AC, single phase, 50 Hz; alternative electrical versions available |
| Final-Filter Selection | H13 HEPA; H14 package available as an alternative |
| Prefilter Selection | Replaceable particulate prefilter upstream of the HEPA stage |
| Fan and Control | Speed-adjustable centrifugal fan; EC drive and remote-control packages selectable |
| Trayectoria del aire | Lower room-air intake and upper discharge louvre for the presented cabinet arrangement |
| Acceso al servicio | Room-side front panel for prefilter and HEPA cassette replacement |
| Housing Finish | Smooth white powder-coated metal cabinet |
| Condition Indication Options | Filter-loading indication, operating-status display or selected particle-sensor input |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
H14 final-filter alternativeMolecular filter stage for a defined odour dutyEC fan-drive packageAlternative outlet-louvre orientationRemote controller or matched BMS interfaceFilter-loading or particle-sensing packageApplication-specific wall bracket
A common starting configuration uses wall support, a replaceable prefilter, H13 HEPA and local speed adjustment. Molecular media, sensors and network control are selected additions; adding another filter changes the resistance and available airflow.
Selection and Installation
Size the recirculation duty
Use room volume, particle sources, occupancy and the existing ventilation system to select a useful filtered-air delivery rate. Fan airflow is not automatically a certified clean-air delivery rate or a room cleanliness class. This recirculator does not add outdoor make-up air; if pressure-supporting supply is required, compare the positive-pressure HEPA air supply unit.
Check the wall and the complete installed envelope
Match the bracket, anchor layout and supporting wall to the assembled operating weight. A cleanroom partition skin is not automatically a structural support. Include bracket stand-off, power-cable routing and the space needed to open the front panel and withdraw the full filter cassette; cabinet-only catalogue dimensions do not include all these clearances.
Place the intake and outlet deliberately
Keep shelves, curtains and stored materials away from the air openings. Locate the upper louvre so discharge is not immediately drawn back into the intake, and check nearby benches for unwanted draughts. Room mixing depends on furniture and the surrounding supply/return pattern; this unit does not create a unidirectional work zone.
Match monitoring and sound to the actual duty
Select the filter package and speed together, then assess electrical input and sound at that operating point. EC describes a drive arrangement, not an acoustic rating. A filter-loading indicator supports maintenance; a particle sensor is a separate option and does not establish an ISO cleanroom classification. Plan power isolation and room-side access before setting the mounting height.
¿Planificación de una especificación de purificador de aire de sala limpia montada en la pared?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
