STJH WP10 waterproof epoxy floor sample showing two smooth resin coats at a cut edge on white

STJH-SOLVENT-FREE-HIGH-BUILD-EPOXY-FLOORING-WP10

Solvent-Free High-Build Epoxy Flooring 1.0 mm Two-Coat Waterproof

A two-pass epoxy barrier build for rooms that require a continuous liquid-resistant floor surface.

Two 0.5 mm smooth coats
Nominal 1 mm waterproof build
Continuous liquid-control surface

About This Product

WP10 is defined by two smooth 0.5 mm epoxy coats, producing a nominal 1 mm waterproofing build. The separate applications provide continuous coverage rather than treating a thin primer as the finished barrier. The resin system is placed over a properly prepared base, while penetrations, wall returns and movement joints receive compatible details. Its purpose is liquid control within the room, not simply surface colour.

Fitur utama:

Independent coverage passes

The second application closes the wearing surface after the first coat has established a continuous base, reducing dependence on one heavy pass.

Detail-ready barrier

A planned perimeter and penetration layout allows the horizontal floor coating to connect with the rest of the room's liquid-control measures.

Smooth cleaning face

The exposed resin avoids a coarse broadcast profile, making residue easier to see and remove around utility equipment.

Parameter teknis

Chemistry	High-solids epoxy
Total Coating Build	1.0 mm
Coat Thickness	0.5 mm per smooth coat
Minimum Coat Count	Two for waterproofing
Finish	Smooth continuous resin
Theoretical Coverage	Approximately 1.9 m²/L per 0.5 mm coat
Component Ratio	1:1 by volume
Application Temperature	10-30 °C
Substrate	Prepared and compatible primed base
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Applications

Suitable for enclosed wet utility areas and controlled rooms where incidental liquids must be kept above the concrete. The waterproof floor package should include outlets, upstands and joints; an intact field coating alone does not make an open doorway or unsealed pipe penetration watertight.

Solutions for Your Application

A thin first pass is being counted as the full waterproof system.

Specify both smooth coats and their combined thickness separately from any primer.

Liquid could bypass the floor at equipment fixings.

Detail compatible seals around penetrations and maintain those details during equipment replacement.

Pilihan yang tersedia

Select clear or pigmented finish, cove connections and compatible joint treatment. Plan any drainage falls in the base before coating so the smooth barrier does not leave unwanted pools.

Planning a Solvent-Free High-Build Epoxy Flooring 1.0 mm Two-Coat Waterproof specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami