Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Independent coverage passes
The second application closes the wearing surface after the first coat has established a continuous base, reducing dependence on one heavy pass.
STJH-SOLVENT-FREE-HIGH-BUILD-EPOXY-FLOORING-WP10
Solvent-Free High-Build Epoxy Flooring 1.0 mm Two-Coat Waterproof
A two-pass epoxy barrier build for rooms that require a continuous liquid-resistant floor surface.
- Two 0.5 mm smooth coats
- Nominal 1 mm waterproof build
- Continuous liquid-control surface
About This Product
WP10 is defined by two smooth 0.5 mm epoxy coats, producing a nominal 1 mm waterproofing build. The separate applications provide continuous coverage rather than treating a thin primer as the finished barrier. The resin system is placed over a properly prepared base, while penetrations, wall returns and movement joints receive compatible details. Its purpose is liquid control within the room, not simply surface colour.
Các tính năng chính
Detail-ready barrier
A planned perimeter and penetration layout allows the horizontal floor coating to connect with the rest of the room's liquid-control measures.
Smooth cleaning face
The exposed resin avoids a coarse broadcast profile, making residue easier to see and remove around utility equipment.
Thông số kỹ thuật
| Chemistry | High-solids epoxy |
|---|---|
| Total Coating Build | 1.0 mm |
| Coat Thickness | 0.5 mm per smooth coat |
| Minimum Coat Count | Two for waterproofing |
| Finish | Smooth continuous resin |
| Theoretical Coverage | Approximately 1.9 m²/L per 0.5 mm coat |
| Component Ratio | 1:1 by volume |
| Application Temperature | 10-30 °C |
| Substrate | Prepared and compatible primed base |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
Suitable for enclosed wet utility areas and controlled rooms where incidental liquids must be kept above the concrete. The waterproof floor package should include outlets, upstands and joints; an intact field coating alone does not make an open doorway or unsealed pipe penetration watertight.
Solutions for Your Application
A thin first pass is being counted as the full waterproof system.
Specify both smooth coats and their combined thickness separately from any primer.
Liquid could bypass the floor at equipment fixings.
Detail compatible seals around penetrations and maintain those details during equipment replacement.
Các tùy chọn có sẵn
Select clear or pigmented finish, cove connections and compatible joint treatment. Plan any drainage falls in the base before coating so the smooth barrier does not leave unwanted pools.
Planning a Solvent-Free High-Build Epoxy Flooring 1.0 mm Two-Coat Waterproof specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
