영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
Independent coverage passes
The second application closes the wearing surface after the first coat has established a continuous base, reducing dependence on one heavy pass.
STJH-SOLVENT-FREE-HIGH-BUILD-EPOXY-FLOORING-WP10
Solvent-Free High-Build Epoxy Flooring 1.0 mm Two-Coat Waterproof
A two-pass epoxy barrier build for rooms that require a continuous liquid-resistant floor surface.
- Two 0.5 mm smooth coats
- Nominal 1 mm waterproof build
- Continuous liquid-control surface
About This Product
WP10 is defined by two smooth 0.5 mm epoxy coats, producing a nominal 1 mm waterproofing build. The separate applications provide continuous coverage rather than treating a thin primer as the finished barrier. The resin system is placed over a properly prepared base, while penetrations, wall returns and movement joints receive compatible details. Its purpose is liquid control within the room, not simply surface colour.
주요 기능
Detail-ready barrier
A planned perimeter and penetration layout allows the horizontal floor coating to connect with the rest of the room's liquid-control measures.
Smooth cleaning face
The exposed resin avoids a coarse broadcast profile, making residue easier to see and remove around utility equipment.
기술 매개변수
| Chemistry | High-solids epoxy |
|---|---|
| Total Coating Build | 1.0 mm |
| Coat Thickness | 0.5 mm per smooth coat |
| Minimum Coat Count | Two for waterproofing |
| Finish | Smooth continuous resin |
| Theoretical Coverage | Approximately 1.9 m²/L per 0.5 mm coat |
| Component Ratio | 1:1 by volume |
| Application Temperature | 10-30 °C |
| Substrate | Prepared and compatible primed base |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
Applications
Suitable for enclosed wet utility areas and controlled rooms where incidental liquids must be kept above the concrete. The waterproof floor package should include outlets, upstands and joints; an intact field coating alone does not make an open doorway or unsealed pipe penetration watertight.
Solutions for Your Application
A thin first pass is being counted as the full waterproof system.
Specify both smooth coats and their combined thickness separately from any primer.
Liquid could bypass the floor at equipment fixings.
Detail compatible seals around penetrations and maintain those details during equipment replacement.
사용 가능한 옵션
Select clear or pigmented finish, cove connections and compatible joint treatment. Plan any drainage falls in the base before coating so the smooth barrier does not leave unwanted pools.
Planning a Solvent-Free High-Build Epoxy Flooring 1.0 mm Two-Coat Waterproof specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
