Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Independent coverage passes
The second application closes the wearing surface after the first coat has established a continuous base, reducing dependence on one heavy pass.
STJH-SOLVENT-FREE-HIGH-BUILD-EPOXY-FLOORING-WP10
Solvent-Free High-Build Epoxy Flooring 1.0 mm Two-Coat Waterproof
A two-pass epoxy barrier build for rooms that require a continuous liquid-resistant floor surface.
- Two 0.5 mm smooth coats
- Nominal 1 mm waterproof build
- Continuous liquid-control surface
About This Product
WP10 is defined by two smooth 0.5 mm epoxy coats, producing a nominal 1 mm waterproofing build. The separate applications provide continuous coverage rather than treating a thin primer as the finished barrier. The resin system is placed over a properly prepared base, while penetrations, wall returns and movement joints receive compatible details. Its purpose is liquid control within the room, not simply surface colour.
Características clave
Detail-ready barrier
A planned perimeter and penetration layout allows the horizontal floor coating to connect with the rest of the room's liquid-control measures.
Smooth cleaning face
The exposed resin avoids a coarse broadcast profile, making residue easier to see and remove around utility equipment.
Parámetros técnicos
| Chemistry | High-solids epoxy |
|---|---|
| Total Coating Build | 1.0 mm |
| Coat Thickness | 0.5 mm per smooth coat |
| Minimum Coat Count | Two for waterproofing |
| Finish | Smooth continuous resin |
| Theoretical Coverage | Approximately 1.9 m²/L per 0.5 mm coat |
| Component Ratio | 1:1 by volume |
| Application Temperature | 10-30 °C |
| Substrate | Prepared and compatible primed base |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Applications
Suitable for enclosed wet utility areas and controlled rooms where incidental liquids must be kept above the concrete. The waterproof floor package should include outlets, upstands and joints; an intact field coating alone does not make an open doorway or unsealed pipe penetration watertight.
Solutions for Your Application
A thin first pass is being counted as the full waterproof system.
Specify both smooth coats and their combined thickness separately from any primer.
Liquid could bypass the floor at equipment fixings.
Detail compatible seals around penetrations and maintain those details during equipment replacement.
Opciones disponibles
Select clear or pigmented finish, cove connections and compatible joint treatment. Plan any drainage falls in the base before coating so the smooth barrier does not leave unwanted pools.
Planning a Solvent-Free High-Build Epoxy Flooring 1.0 mm Two-Coat Waterproof specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
