STJH PU-CAPPED-20 cured antistatic flooring sample showing a matte cap above an epoxy body at the cut edge on white

STJH-ANTISTATIC-EPOXY-FLOORING-PU-CAPPED-20

Antistatic Epoxy Flooring Polyurethane-Capped

A conductive epoxy floor body finished with a separate matte polyurethane ESD coating for easy surface renewal.

Epoxy body with polyurethane ESD cap
1.5-2.0 mm layered build
Renewable smooth matte finish

About This Product

PU-CAPPED-20 places a self-smoothing conductive epoxy body above a grounded conductive primer, then adds a water-based polyurethane ESD finish. The resulting 1.5-2.0 mm system is classified by its epoxy body but is not an all-epoxy construction. The functional topcoat establishes a matte exposed face and can be renewed independently when surface wear requires maintenance.

Fitur utama:

Colour stability in daylight

The polyurethane-finished construction offers resistance to UV exposure and yellowing, helping retain its appearance in interior areas receiving daylight.

Grounded layer sequence

Primer, earthing connections and conductive layers form a coordinated route for static charge rather than relying on surface colour or a loose accessory.

Reduced surface glare

A matte finish can be useful around inspection and assembly areas where a highly reflective floor is undesirable.

Parameter teknis

Structural Resin	Conductive epoxy
Topcoat Resin	Water-based polyurethane ESD
Nominal Thickness	1.5-2.0 mm
Layer Sequence	Primer, conductive primer, epoxy body, ESD topcoat
Grounding	Earthing connections through conductive primer
Permukaan selesai	Smooth matte
Static-Control Arrangement	Floor combined with compatible ESD footwear
Refurbishment Method	Compatible ESD topcoat renewal
Service Location	Interior electrostatic protected areas
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Applications

Suitable for electronics assembly, clean inspection and pharmaceutical support areas needing a matte ESD floor. The floor, footwear and cleaning products must work together: an insulating maintenance coating can interrupt the intended contact path even when the original resin layers remain intact.

Solutions for Your Application

The wearing face may need renewal before the epoxy body wears out.

Use the compatible polyurethane ESD maintenance coat after preparing the existing surface.

Ordinary polish could change the floor's static-control behaviour.

Use an ESD-compatible cleaning regime and preserve the specified exposed topcoat.

Pilihan yang tersedia

Select the colour, grounding layout and cove interface as one floor package. Retain the polyurethane functional finish when ordering this model; an exposed epoxy surface is a different construction.

Planning a Antistatic Epoxy Flooring Polyurethane-Capped specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami