Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Colour stability in daylight
The polyurethane-finished construction offers resistance to UV exposure and yellowing, helping retain its appearance in interior areas receiving daylight.
STJH-ANTISTATIC-EPOXY-FLOORING-PU-CAPPED-20
Antistatic Epoxy Flooring Polyurethane-Capped
A conductive epoxy floor body finished with a separate matte polyurethane ESD coating for easy surface renewal.
- Epoxy body with polyurethane ESD cap
- 1.5-2.0 mm layered build
- Renewable smooth matte finish
About This Product
PU-CAPPED-20 places a self-smoothing conductive epoxy body above a grounded conductive primer, then adds a water-based polyurethane ESD finish. The resulting 1.5-2.0 mm system is classified by its epoxy body but is not an all-epoxy construction. The functional topcoat establishes a matte exposed face and can be renewed independently when surface wear requires maintenance.
Key Features
Grounded layer sequence
Primer, earthing connections and conductive layers form a coordinated route for static charge rather than relying on surface colour or a loose accessory.
Reduced surface glare
A matte finish can be useful around inspection and assembly areas where a highly reflective floor is undesirable.
Technische Parameter
| Structural Resin | Conductive epoxy |
|---|---|
| Topcoat Resin | Water-based polyurethane ESD |
| Nominal Thickness | 1.5-2.0 mm |
| Layer Sequence | Primer, conductive primer, epoxy body, ESD topcoat |
| Grounding | Earthing connections through conductive primer |
| Oberfläche Finish | Smooth matte |
| Static-Control Arrangement | Floor combined with compatible ESD footwear |
| Refurbishment Method | Compatible ESD topcoat renewal |
| Service Location | Interior electrostatic protected areas |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Applications
Suitable for electronics assembly, clean inspection and pharmaceutical support areas needing a matte ESD floor. The floor, footwear and cleaning products must work together: an insulating maintenance coating can interrupt the intended contact path even when the original resin layers remain intact.
Solutions for Your Application
The wearing face may need renewal before the epoxy body wears out.
Use the compatible polyurethane ESD maintenance coat after preparing the existing surface.
Ordinary polish could change the floor's static-control behaviour.
Use an ESD-compatible cleaning regime and preserve the specified exposed topcoat.
Verfügbare Optionen
Select the colour, grounding layout and cove interface as one floor package. Retain the polyurethane functional finish when ordering this model; an exposed epoxy surface is a different construction.
Planning a Antistatic Epoxy Flooring Polyurethane-Capped specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
