Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Colour stability in daylight
The polyurethane-finished construction offers resistance to UV exposure and yellowing, helping retain its appearance in interior areas receiving daylight.
STJH-ANTISTATIC-EPOXY-FLOORING-PU-CAPPED-20
Antistatic Epoxy Flooring Polyurethane-Capped
A conductive epoxy floor body finished with a separate matte polyurethane ESD coating for easy surface renewal.
- Epoxy body with polyurethane ESD cap
- 1.5-2.0 mm layered build
- Renewable smooth matte finish
About This Product
PU-CAPPED-20 places a self-smoothing conductive epoxy body above a grounded conductive primer, then adds a water-based polyurethane ESD finish. The resulting 1.5-2.0 mm system is classified by its epoxy body but is not an all-epoxy construction. The functional topcoat establishes a matte exposed face and can be renewed independently when surface wear requires maintenance.
Características clave
Grounded layer sequence
Primer, earthing connections and conductive layers form a coordinated route for static charge rather than relying on surface colour or a loose accessory.
Reduced surface glare
A matte finish can be useful around inspection and assembly areas where a highly reflective floor is undesirable.
Parámetros técnicos
| Structural Resin | Conductive epoxy |
|---|---|
| Topcoat Resin | Water-based polyurethane ESD |
| Nominal Thickness | 1.5-2.0 mm |
| Layer Sequence | Primer, conductive primer, epoxy body, ESD topcoat |
| Grounding | Earthing connections through conductive primer |
| Superficie acabada | Smooth matte |
| Static-Control Arrangement | Floor combined with compatible ESD footwear |
| Refurbishment Method | Compatible ESD topcoat renewal |
| Service Location | Interior electrostatic protected areas |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Applications
Suitable for electronics assembly, clean inspection and pharmaceutical support areas needing a matte ESD floor. The floor, footwear and cleaning products must work together: an insulating maintenance coating can interrupt the intended contact path even when the original resin layers remain intact.
Solutions for Your Application
The wearing face may need renewal before the epoxy body wears out.
Use the compatible polyurethane ESD maintenance coat after preparing the existing surface.
Ordinary polish could change the floor's static-control behaviour.
Use an ESD-compatible cleaning regime and preserve the specified exposed topcoat.
Opciones disponibles
Select the colour, grounding layout and cove interface as one floor package. Retain the polyurethane functional finish when ordering this model; an exposed epoxy surface is a different construction.
Planning a Antistatic Epoxy Flooring Polyurethane-Capped specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
