Sanitary sampling valve three-quarter view with manual handwheel

Sistem Utilitas Cleanroom

Katup Sampling Sanitary Valve

A compact 316L membrane valve for withdrawing representative samples from hygienic tanks and process piping without exposing the main process to the surrounding environment.

Sterilizable sampling path
Compact 316L wetted body
Tank or pipe mounting options

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The sanitary sampling valve provides a controlled small-bore path for routine microbiological or physicochemical sampling. A resilient membrane separates the operating mechanism from the product, while the polished stainless body and dedicated outlet arrangement support cleaning and sterilization before and after a sample is taken.

Fitur utama:

316L stainless product-contact body

Manual handwheel operation

Replaceable EPDM or silicone membrane

Polished low-retention wetted path

Separate sample and sterilization ports

Compact weld-in body

Drainable outlet orientation

Pneumatic actuation available as an option

Solusi untuk aplikasi Anda

A useful sample must represent the process while the valve remains cleanable, drainable and protected from contamination between sampling events.

A stagnant sample pocket compromises representativenessUse a compact low-volume body mounted close to the process wall or pipe bore.

Ambient contamination enters through the outletSterilize the dedicated outlet path before and after sampling and cap it between uses.

Residue remains behind the membraneSelect a drainable mounting orientation and inspect the membrane at defined maintenance intervals.

Operators release too much productUse the fine manual handwheel or an appropriately controlled pneumatic actuator for repeatable opening.

Aplikasi yang Tipis

Purified Water and WFI sampling pointsBiopharmaceutical vesselsSterile formulation linesFood and beverage process tanksCIP and SIP verification points

Parameter teknis

Representative construction values depend on body style, process connection, outlet arrangement and membrane compound.

Bahan inti	316L stainless steel wetted body with EPDM or silicone membrane
Ketebalan Panel (Panel Thickness)	Process body wall typically 3.0–6.0 mm
Efektif lebar	Valve body width typically 55–90 mm
Panjang maksimum	Overall installed length typically up to 180 mm
Baja menghadap ketebalan	Stainless bonnet and handwheel components typically 1.5–4.0 mm
Kepadatan inti (core density)	316L stainless steel kepadatan sekitar 8000 kg / m3
Konduktivitas Termal (Thermal Conductivity)	316L stainless steel sekitar 15 W / (m · K) pada suhu ambien
Permukaan selesai	Product-contact surfaces mechanically polished to a typical Ra ≤ 0.8 µm, with satin external finish
Jenis Bersama	Weld-in tank or pipe body with dedicated sample and sterilization outlet connections
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Tank-weld bodyPipe-weld bodySocket-mounted bodyManual or pneumatic actuatorEPDM or silicone membraneSingle- or double-seat arrangementQuick-connect outlet accessory

Planning a Sanitary Sampling Valve specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami