영어
포르투갈어
스페인어
말레이어
인도네시아어
독일어
터키어
베트남어
프랑스어
러시아어
아랍어
태국어
일본어
한국어현재 Current
클린룸 유틸리티 시스템
위생 샘플링 밸브 Sanitary Sampling Valve
A compact 316L membrane valve for withdrawing representative samples from hygienic tanks and process piping without exposing the main process to the surrounding environment.
- Sterilizable sampling path
- Compact 316L wetted body
- Tank or pipe mounting options
상품 소개
The sanitary sampling valve provides a controlled small-bore path for routine microbiological or physicochemical sampling. A resilient membrane separates the operating mechanism from the product, while the polished stainless body and dedicated outlet arrangement support cleaning and sterilization before and after a sample is taken.
주요 기능
Manual handwheel operation
Replaceable EPDM or silicone membrane
Polished low-retention wetted path
Separate sample and sterilization ports
Compact weld-in body
Drainable outlet orientation
Pneumatic actuation available as an option
응용 프로그램 솔루션
A useful sample must represent the process while the valve remains cleanable, drainable and protected from contamination between sampling events.
A stagnant sample pocket compromises representativenessUse a compact low-volume body mounted close to the process wall or pipe bore.
Ambient contamination enters through the outletSterilize the dedicated outlet path before and after sampling and cap it between uses.
Residue remains behind the membraneSelect a drainable mounting orientation and inspect the membrane at defined maintenance intervals.
Operators release too much productUse the fine manual handwheel or an appropriately controlled pneumatic actuator for repeatable opening.
일반적인 응용 프로그램
Purified Water and WFI sampling pointsBiopharmaceutical vesselsSterile formulation linesFood and beverage process tanksCIP and SIP verification points
기술 매개변수
Representative construction values depend on body style, process connection, outlet arrangement and membrane compound.
| 핵심 재료 | 316L stainless steel wetted body with EPDM or silicone membrane |
|---|---|
| 패널 두께 | Process body wall typically 3.0–6.0 mm |
| 유효 폭 | Valve body width typically 55–90 mm |
| 최대 길이 | Overall installed length typically up to 180 mm |
| 강철 면면 두께 | Stainless bonnet and handwheel components typically 1.5–4.0 mm |
| 코어 밀도 | 316L 스테인리스 밀도 대략 8000 kg/m³ |
| 열전도도 (Thermal Conductivity) | 316L 스테인리스 주위 온도에서 대략 15 W/(m · K) |
| 표면 마무리 | Product-contact surfaces mechanically polished to a typical Ra ≤ 0.8 µm, with satin external finish |
| 접합 유형 | Weld-in tank or pipe body with dedicated sample and sterilization outlet connections |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
Tank-weld bodyPipe-weld bodySocket-mounted bodyManual or pneumatic actuatorEPDM or silicone membraneSingle- or double-seat arrangementQuick-connect outlet accessory
Planning a Sanitary Sampling Valve specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
