Anglais
Le portugais
espagnol
Le malais
Indonésien
Allemand
Le turc
Le vietnamien
FrançaisCurrent
russe
Arabe
Thaïlandais
Japonais
Coréen
Systèmes utilitaires Cleanroom
Valve d'échantillonnage sanitaire
A compact 316L membrane valve for withdrawing representative samples from hygienic tanks and process piping without exposing the main process to the surrounding environment.
- Sterilizable sampling path
- Compact 316L wetted body
- Tank or pipe mounting options
Introduction de produit
The sanitary sampling valve provides a controlled small-bore path for routine microbiological or physicochemical sampling. A resilient membrane separates the operating mechanism from the product, while the polished stainless body and dedicated outlet arrangement support cleaning and sterilization before and after a sample is taken.
Key Features
Manual handwheel operation
Replaceable EPDM or silicone membrane
Polished low-retention wetted path
Separate sample and sterilization ports
Compact weld-in body
Drainable outlet orientation
Pneumatic actuation available as an option
Des solutions pour votre application
A useful sample must represent the process while the valve remains cleanable, drainable and protected from contamination between sampling events.
A stagnant sample pocket compromises representativenessUse a compact low-volume body mounted close to the process wall or pipe bore.
Ambient contamination enters through the outletSterilize the dedicated outlet path before and after sampling and cap it between uses.
Residue remains behind the membraneSelect a drainable mounting orientation and inspect the membrane at defined maintenance intervals.
Operators release too much productUse the fine manual handwheel or an appropriately controlled pneumatic actuator for repeatable opening.
Les applications typiques
Purified Water and WFI sampling pointsBiopharmaceutical vesselsSterile formulation linesFood and beverage process tanksCIP and SIP verification points
Paramètres techniques
Representative construction values depend on body style, process connection, outlet arrangement and membrane compound.
| Matériaux de base | 316L stainless steel wetted body with EPDM or silicone membrane |
|---|---|
| Panneau épaisseur | Process body wall typically 3.0–6.0 mm |
| Largeur effective | Valve body width typically 55–90 mm |
| Longueur maximale | Overall installed length typically up to 180 mm |
| Acier face épaisseur | Stainless bonnet and handwheel components typically 1.5–4.0 mm |
| Densité Core | Acier inoxydable 316L densité environ 8000 kg/m³ |
| Conductivité thermique | Acier inoxydable 316L environ 15 W/(m · K) à température ambiante |
| surface finie | Product-contact surfaces mechanically polished to a typical Ra ≤ 0.8 µm, with satin external finish |
| Type joint | Weld-in tank or pipe body with dedicated sample and sterilization outlet connections |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Tank-weld bodyPipe-weld bodySocket-mounted bodyManual or pneumatic actuatorEPDM or silicone membraneSingle- or double-seat arrangementQuick-connect outlet accessory
Planning a Sanitary Sampling Valve specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
