İngilizce
Portekizce
İspanyolca
Malay dilinde
Endonezya dilinde
Almanca
TürkçeCurrent
Vietnamca
Fransızca
Rusça
Arapça
Taylandca
Japonca
Korece
Temiz Oda Hizmet Sistemi
Sanitary Sampling Valve
A compact 316L membrane valve for withdrawing representative samples from hygienic tanks and process piping without exposing the main process to the surrounding environment.
- Sterilizable sampling path
- Compact 316L wetted body
- Tank or pipe mounting options
Ürün tanıtımı
The sanitary sampling valve provides a controlled small-bore path for routine microbiological or physicochemical sampling. A resilient membrane separates the operating mechanism from the product, while the polished stainless body and dedicated outlet arrangement support cleaning and sterilization before and after a sample is taken.
Ana Özellikler
Manual handwheel operation
Replaceable EPDM or silicone membrane
Polished low-retention wetted path
Separate sample and sterilization ports
Compact weld-in body
Drainable outlet orientation
Pneumatic actuation available as an option
Uygulamanız için çözümler
A useful sample must represent the process while the valve remains cleanable, drainable and protected from contamination between sampling events.
A stagnant sample pocket compromises representativenessUse a compact low-volume body mounted close to the process wall or pipe bore.
Ambient contamination enters through the outletSterilize the dedicated outlet path before and after sampling and cap it between uses.
Residue remains behind the membraneSelect a drainable mounting orientation and inspect the membrane at defined maintenance intervals.
Operators release too much productUse the fine manual handwheel or an appropriately controlled pneumatic actuator for repeatable opening.
Tipik uygulamalar
Purified Water and WFI sampling pointsBiopharmaceutical vesselsSterile formulation linesFood and beverage process tanksCIP and SIP verification points
Teknik parametreler
Representative construction values depend on body style, process connection, outlet arrangement and membrane compound.
| Temel malzemeler | 316L stainless steel wetted body with EPDM or silicone membrane |
|---|---|
| Panel kalınlığı | Process body wall typically 3.0–6.0 mm |
| Effective Width (Etkili Genişlik) | Valve body width typically 55–90 mm |
| Maksimum uzunluk | Overall installed length typically up to 180 mm |
| Çelik yüz yüze kalınlığı | Stainless bonnet and handwheel components typically 1.5–4.0 mm |
| Core Density (Çekirdek Yoğunluğu) | 316L paslanmaz çelik yoğunluğu yaklaşık 8000 kg/m³ |
| Termal İletkenlik | Ortam sıcaklığında 316L paslanmaz çelik yaklaşık 15 W/(m · K) |
| Yüzey bitirme | Product-contact surfaces mechanically polished to a typical Ra ≤ 0.8 µm, with satin external finish |
| Ortak tip | Weld-in tank or pipe body with dedicated sample and sterilization outlet connections |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Tank-weld bodyPipe-weld bodySocket-mounted bodyManual or pneumatic actuatorEPDM or silicone membraneSingle- or double-seat arrangementQuick-connect outlet accessory
Planning a Sanitary Sampling Valve specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
