Complete cleanroom central alarm cabinet with color touchscreen, red beacon and annunciator buttons

Kontrol Cleanroom dan Sistem Pemantauan Lingkungan

Cleanroom Central Alarm System (Sistem Alarm Pusat)

A dedicated alarm annunciation platform that consolidates room, equipment, door and utility events into prioritized visual, audible and remote notifications.

Priority-Based Annunciation
First-Out Event Capture
Zone Alarm Mapping
Remote Notification Outputs

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The cleanroom central alarm system receives dry contacts, analog alarm states and network events from environmental instruments and supporting equipment. A color touchscreen and physical audible-visual devices distinguish critical alarms from warnings and maintenance notices. First-out sequencing identifies the initiating event before secondary conditions appear, while acknowledgement, silence and reset remain separate operator actions. Local alarm panels can be distributed by suite and connected to a central workstation without replacing the independent alarm functions at each room.

Fitur utama:

First-out chronology highlights the event that initiated a chain of related alarms.

Distinct colors and sound patterns separate critical, warning and advisory priorities.

Zone maps direct responders to the affected room, airlock, utility or equipment item.

Isolated relay and network outputs route selected alarms to BMS, EMS or remote dialers.

Solusi untuk aplikasi Anda

A central alarm system must make the first actionable condition obvious without suppressing local room-level warnings.

Many alarms appear together and operators cannot identify the initiating fault.First-out sequencing and synchronized timestamps preserve the original event order.

All events use the same buzzer and receive the same response.Priority-specific colors, sounds and routing distinguish urgent excursions from maintenance notices.

Responders know an alarm exists but not where it originated.Room and equipment maps connect each alarm point to a clear physical location.

Silencing a horn is confused with clearing the alarm condition.Separate acknowledge, silence and reset functions preserve alarm state until the input returns normal.

Aplikasi yang Tipis

Set produksi farmasiBiocontainment facilitiesMedical cleanroom campusesSemiconductor utility monitoring

Parameter teknis

Typical construction values for a centralized cleanroom alarm annunciator cabinet are listed below.

Bahan inti	Powder-coated steel enclosure with FR-4 annunciator boards, copper relay contacts and industrial touchscreen
Ketebalan Panel (Panel Thickness)	Kedalaman kabinet 180-350mm
Efektif lebar	500-1000 mm panel width
Panjang maksimum	Up to 1800 mm panel height
Baja menghadap ketebalan	Panel baja berlapis bubuk 1.2-1.8mm
Kepadatan inti (core density)	7800-8050 kg/moton untuk komponen penutup baja
Konduktivitas Termal (Thermal Conductivity)	45-60 W/(m·K) for steel structural panels
Permukaan selesai	Light-gray powder coating with color HMI, red beacon and labeled silence-reset controls
Jenis Bersama	Gasketed cabinet with pluggable alarm inputs, isolated relay outputs and network gateway
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Touchscreen or LED annunciatorFirst-out alarm logicSMS and email gatewayRedundant power supply

Planning a Cleanroom Central Alarm System specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami